Fixed a crack in the windscreen with a super cheap kit and it's worked a treat
Type: Posts; User: megatexture
Fixed a crack in the windscreen with a super cheap kit and it's worked a treat
About to go change the tyres to roadies now all the public hols have passed, verry happy with how the new km2s went.
Loaded the kids up and went looking at Xmas lights last night..... It was good seeing there reactions but for me it was about as much fun as the forum lights....zzz.
Is your on a GU or a GQ? I’ve got no body lift and I had to slightly trim the tower on one side and the shock bush retaining washer is above the wheel arch and inside the engine bay.
The...
I used a 60 mm and the top bush retainer barely fit through it I'll put up a pic in a bit
Just finished extending the front shock mounts, I only managed to get an extra 40mm and it was a tight fit even with some wheel arch pannel work and a 60mm hole cut up the top to access the top of...
Gridded the sht out of my shock towers and painted em tomorrow to cut the wheel arches for access to the shock top bolt
In the process of extending the front mounts and its giving me the shits I can only get 40mm out of it so may have to take 10 mm off the extentions grrr
Were they wearing unevenly?
So we can make another celeb rip thread when his wheel falls off lol
Should have got a dual volt to keep an eye on what the alternator is up to. Or have you got one already fitted
Drain holes? The legs aren't tube are they? I've only herd of the iron man racks leaking rust and they are a different design
I've got the same ones on my car, it's a straight swap for whats on it now but I don't think mine has a right angle goes straight up
These are the same fittings used for airbags also
Packed the camper/ car for a weekend away
Took her in for a service
Got a pic of them on at night ?
Wishful thinking lol
Wow that wheel bay looks awesome! I've been looking for something similar but one that would go on a roof rack
Detailed the interior.. Last time the kids eat anything in the car !
Paid it off, one less bill to look forward to
Time to sell the ute and get a truck lol
Only got it to primer stage so not as far as I hoped but it's still moving forward
I'll be working on the car dent pulling, fitting sliders and welding on brush bars ..... Hopefully get most of it done
I'd love to but not ready ATM
Picked it up from the mechanic and got my old transfer so I can check it out and see if I can work out what the issue was with it also so I have a spare incase I want reduction gears in the future...
Not the patrol as its in the workshop getting the tranny sorted but I'm welding on some adjustable levelling legs on the camper and after that I've got a 85ltr water tank to fit mounts for and plumb...
Cut off my brush bar/steps to make way for some sliders, can't wait .. And that's what the missus said as she's struggling to get in ATM lol