Would someone be able to plug a scan tool in to their car and read the live trans data for me and tell me if the speed sensor 1 and speed sensor 2 from the auto trans are both meant to be giving a...
Type: Posts; User: Remdogg
Would someone be able to plug a scan tool in to their car and read the live trans data for me and tell me if the speed sensor 1 and speed sensor 2 from the auto trans are both meant to be giving a...
I’m having a problem with the trans. It gets stuck in 2nd gear. If I stop and turn the car off it fixes it for about 10 mins. The scan tool says a/t speed sensor 1 fault. In the data mode speed...
I have just fired an amp to my stereo and now have engine buzz through the speakers. I have checked earths, checked rca cables. If I unplug the rca cables from the back of the head unit it goes away....
Mine does the same thing when I get a fault code. Drill a 6 mm hole in the blanking plate.
What are your egt's. They should be high if overfueling.
Check out page 8 figure 16 on the link.
http://www.pedders.com.au/sites/default/files/PS_images/assets/Nissan%20Patrol%20Y61%20GU%20Swivel%20Hub%20Seal%20Installation.pdf
I tried everything...
Mate I had the same problem and had to remove the shims to fix it. There is a measurement of how much force it takes to move to hub so you don't put the bearings under to much load. I'll try find it...
Do they have Internet in New Zealand 😃 just jokes, welcome to the forum.
So put "blown motor, no mods at all, worst example of a patrol ever" and now no one will steal it.
Not sure mate but welcome to the forum. Maybe ask in another area to get more replies. Someone here will know.
Yep I'm jealous. Welcome to the forum.
Mines a CRD but I had an over boost error code even though the engine light didn't come on. No sure if Di patrols log it.
How do you put down what mods have been made to ya rig, come up when ha post. I see some people have it some don't and I can't figure it out.
So does yours hit limp mode after 12? Have you checked the error code. A bit more boost would lower you egts from my experience.
Mudski will have the needle valve and the instruction on what to block. They were easy to follow.
That's pretty well what my crd is set on and feels good. More boost did have my egts lower when I was flogging it but went to limp mode after about a week so I took 2 psi out of it. Spikes to 20 then...
So what is the highest I should go I thought 550 was the limit. I know mine gets up there if I give it a good kick.
Oh yeh CRD
Asked about getting my ecu flash tuned. Says the they do it on the dyno real time. I ask about egt increase and this was his reply.
Thanks for your enquiry.
We have done testing with a Y61...
I've been googling for hours and am fairly confused now. Are bar and plate intercooler a any good? Pros and cons for each?
Auto meter do one that you drill a hole in the exhaust and it holds the probe in with a hose clamp and sealed by ceramic washer.
Thanks for that helped me figure it out. The blue was power and pink was nevitive that went to the dimmer.
I have fitted a couple of guages and need to hook up the lights. I tried the pink wire on the back of the dimmer with no luck. The voltage moved up and down with the dimmer so I thought it would have...
It's a Crd mate
Yeh. The heat shield was fun. I used a rattle gun with extensions on half the bolts. Wasn't to bad to do. The boost was flicking around like crazy after. Didn't feel like it but you saw it on the...