Search:

Hi all, sorry for the grave dig!
Just wondering if anyone has any up to date info on the fluctuating temp gauge problems? Also like to add my experience about this, might help someone else in the...

Where are you located?
O2 exhaust sensor, maf sensor can cause power loss if they're faulty

Thanks Dinger, its a warn high mount so it will be pretty heavy. Thanks for that

Gday qlders!

Ive got my eye on an item on gumtree in Smithfield Cairns and was wondering if anyone in the area would be willing to collect it for me? I can then arrange freight from your location...

I have a bunker too and its awesome. I was in the market for a dome swag then stumbled on the bunker, at around the same price as a decent brand swag ($389 delivered from Snowys)
A friend bought one...

I got mine from nizzbits

http://www.nizzbits.com.au/product_info.php?cPath=1_16&products_id=6

Cant remember for sure but if there's a threaded hole or two on the rotor, find a spare bolt and use this to pry the disc off if its tight

Black duck, how did you go with getting it registered, are you in WA?

As for the original poster, killa kustom kables are doing these and many other conversions now, worth a look...

I have a lockright in mine and im very happy with it.
The reason I went down that path was at the time, 4WD Systems had a backlog of around 6 weeks for their lokka and a $150 higher price tag.
...

If you watch the video closely, the strap hasnt actually broken, the pin has sheared (or bent) sending the strap and pin into that vehicles headlight.

Then he getts his recovery hitch insert out...

Using the strap through hitch pin may not the best idea also
http://www.youtube.com/watch?v=Vcv3yII7zUc

I guess this is reffering to the zd30?

Goodluck, you will be amazed at the difference they make :)

The way I see it, a turbo manifold will probably cost the same as extractors and then all the extras you need are a turbo, oil lines and the intake side, you were going to get the exhaust done anyway...

The easiest things to do are exhaust and tune with higher boost.
Then the $$$ starts to pile up, the factory intercooler, airbox and turbo are really only good for around 15psi. A new turbo and...

Mine is wired directly to the second battery and I have left it on overnight heaps of times without that battery going flat, if does the red arc solenoid should do its thing.

Im always using my...

Garret gt2860rs with a .64 turbine housing are well suited and spool up nice and quick.
Or Mitsubishi td05 16g which is the preffered choice of a well known diesel tuner here in WA, this is what I...

Oh and thanks for all the thanks!!
Choosing music was hard! I hope you liked it, tried to use something different

http://www.youtube.com/watch?v=01VjnTfpOC8
...

At the airbox where it meets the snorkel, there is usually just a foam seal sandwiched in between (as was the case with this one that drowned) and there will be drain holes in the bottom that need...

It took a little bit of work from the boys pulling the injectors out and turning it over only to have it lock again once they went back in = oh dear!!!
Pulling them out again must of did the trick...

Gday guys, had an awesome trip up the lines yesterday and thought I would share the video I made :)


http://youtu.be/qMZuwky9pVE

Thanks for watching

Where did you get the recovery points for the ute from? I cant find them anywhere

I assumed he was talking about the flange nut on the transfer case end,

Is your engine running?
I took mine off yesterday, started the engine and let the clutch out in 4L in 1st, worth a shot. If you do it in reverse, it will tighten I believe

Do you have a link to where you purchased them from? Cheers