Ally sheet was free which I cut into shape and powder coating also free through work, 4mm glass replacement peice was secured with the same rubber you use for the glass.
Hinges were about $60 all...
Type: Posts; User: Ben89
Ally sheet was free which I cut into shape and powder coating also free through work, 4mm glass replacement peice was secured with the same rubber you use for the glass.
Hinges were about $60 all...
819048190581906
😂 well if so I'll come say hi where ever ya are
Yep, simple and watertight
Recon you could hold the springs and shocks for me until after this lockdown? Would appreciate it so much
If only I was closer, still have original springs and shocks in mine 😂 saving up for some top notch 3 inch lift kit and don't wanna spend $800 or so on. A2 inch for now
😂 if you still have them and are anywhere near se suburbs I'll take em
Thought I'd share my gullwings for some inspiration
Nice and simple, just 4mm ally sheet (for inside the GQ solid cargo rubber) and 3mm for the hinge door and some 10mm offset hinges 8190081899
Looks alot like what I want 😂 I'll have the uhf cords out the way as I barely use it, thanks for the pic though! Will help heaps
Thinking I might need to lip it up towards the windscreen aswell, just not sure how it will look
81889
81890
81891
81892
81893
So I'm in the process of making up a roof console with a uhf in the middle and switches at either side with a sunglasses holder underneath with lights but might just change that part to just lights...
Go snatch strap and hoon out somewhere with the pin out
Hey guys, well a week ago i went into a boghole and my engine cut out, turns out its a bent rod, the mechanic told me about $2200 for an engine swap over and $2950 for the engine from another...
Cheers guys, appriciate the feedback, its stressing me out because i have no car to drive atm and have to use other family members cars ><
Ok long story short, i drove through a boghole (stupid) and got water in my engine and beleive i bent a rod, i can hear it right under the sump knocking abit.. what would you do if yoy were in the...
ah cheers for that guys, gonna go look at some tomorrow
is there any special good brands? or all the same?
nah no guages fitted what so ever
what guages would I be looking at? like even the link for them lol, im no good with the electric side of things, only manual heavy duty shit
nah wouldnt have a clue, old owner chucked it on, ill try for a better look after work and see if I can spot any numbers or anything
if I went past a turbo place im guessing they could possibly tell what it is im assuming..
cheers for the info guy, just what im after, any way of telling if its a t3 flange? Im not sure what turbo is on it atm
and whats a actuator, says I might need one?
gdsy guys, slowly learning more and more and just want some imput for this turbo
http://m.ebay.com.au/itm/271489481529?nav=SEARCH
I have a 2 inch exhaust, turbo manifold on the turbo I have on...