Guys and pin scheme of this kind of engine control unit no who?:
52604
Type: Posts; User: Extrimal D
Guys and pin scheme of this kind of engine control unit no who?:
52604
I set the boost controller so we took the spare tire pumped MPa, connected with boost, and then rehearsed 1.4-1.5 MPa. Pressure turbine shows 0.9 MPa at maximum .
Hi guys! I just put plugs and cleaned all pipes. The sensor is left connected. That would not give an error. Everything works, the engine breathes freely.
With the right three kind of living. And here are the First two, especially the second one is in very good condition. And the question, why Bosch and NGK?
While the CRD is not common rail?
While the CRD is not common rail?
Information is good, but too little.
And if you try to put the CV joints?
In Moscow now put the engine from Chevrolet.
In consequence of the extreme heat is more rapid evaporation of the fuel. I think the failures because of this. It is possible to cool the intake manifold water.
I have a leak was behind the plate oil filter. Only noticed when I removed the plate.
Thank you very much. Right now I'm going to check through EXZIST. If all is well will order new wiring.
No one will help ?
Need VIN on car NISSAN PATROL ZD30 CRD? If you need to order the scythe(wiring) on the engine.
Poles like to put the motors from Chevrolet. Volume 6.2 atmospheric V6, and 6.5 turbo V8.
The engine from Elgrant stood as a native. The difference was in gearboxes. I have a automatic transmission and the engine manual. We had to rearrange his pallet and to drill three holes, because the...
TD42 be changed only with box together. To set the cable to the gas pedal. Put the oil filter of a smaller size. To coordinate the transaction. That's about it.
This photo of a bell from MT box with dimensions in mm:
52488
The Intake Y 61:
52408
52409
52410
"Nostril" on the hood made from carbon fiber, the matrix. Made of two kinds: Y60 and Y61.
Well as the dismantling process has ended or not?
Intercooler posed with a fan. But without a temperature sensor. Include his force button in C.
Set the boost controller. Fuel filter RACOR heated. But as sad as it the engine died.
Leaky intercooler bad. Factory intercooler not reliable, so I recommended it to replace.Wash the inside with soap and water to further purge flushing.
This intercooler took in Vladivostok. He Is Chinese. Itself with China don't drive. Easier to order the people who have already established supply chain from China.
Here is a photo of my intercooler:
52403 52404 52405 52406
Noticeable increase in power is not noticed.