Search:

i just remembered i added a pressure cut out switch for the surge tank pump62297
heres a pic showing the throttle cable bracket and the air box

when I did mine , I found i had to make a bracket for the throttle cable , i used a skyline donor , basically i combine the patrol and the skyline ones together to get the placement i needed. i used...

everything was working prior to it being removed from the skyline,
do i need to run power from the battery direct to the coil to give it more power to create the spark?

I am at the end stage of fitting an EFI RB30 motor from a skyline, have wired it up but am getting no spark, there is power to the coil. any advice would be helpful.
I have searched the forum already

i ended up using a VL commodore air box and some pvc pipe46616

currently putting in a EFI RB30 motor into my troll, was wondering how other people who have done this placed the air box. I have a snorkel and would like it attached to that. i have removed the...

up date , drilled a hole where it should be for the bracket and tapped a tread, you cannot be too careful in my books

I have been told -22 also, that is the way I am going for my GQ

hey Typo, yer a pic would be most helpful

The oil pick up in the sump of the Patrol motor has a support bracket on it. the skyline motor does not have threaded hole to attach this bracket to. is it important to attach this bracket to stop...

I found out it is 1L per minute

Google has been no help to me . I am setting a a surge tank for my EFI conversion and would like to know the flow rate for the standard in tank fuel pump on a RB30 carbie model.

I now have the motor out of the patrol and it appears that the big end bearing on number4 was dry so the bearing ceased and the conrod was distoyed and punched the hole in the side of the block....

I am about to do this swap myself. the skyline pump is 2 short for the tank. what pump did you end up using? is there a way to extend the pump? what about the wiring? did you put a relay in to...

just perchased a skyline with 160,000km on the clock, paid a bit for it but the motor is sweet

mine is a RB30, carbied, i have yet to pull the motor out to look at it but there is a big hole in the side of the block, guessing that i have distoyed a piston and the conrod has punched through ,...

my motor died the other day , so looking for a new one , is it easier to go with a skyline EFI motor or go diesel? i have found a few RB30 skylines for under 1.5K , found one that claims to only have...

cool thanks for the link , i do not have the original bolts or tabs so I will have to find some to do it , makes good sense to do it that way

Hey Taslucas, I am still having issues with my carbie, problem only happens once iun a blue moon ussally when we are loaded up and going on a trip or an outing , the rubber boot in above photo is...

what are the 2 black pipes for on the bottom left hand side of my carbie for? they are bottm middle in photo. should they have a hose on them?

ok dumb question time, how do you attach the bunnings variety ones?

i will do the same but it has only happened 3 times in the 8 months i have owned it so who knows when it will happen again

it has happened again, bugga, something must be sticking coz when I play around with the throtle cable and spray the carby with WD or the like it stops
got me scratching my head

the argument was that it would be a different gear ratio, the only real difference that i have noticed is that in 3rd it has lost a little , but its hard to tell.
I got a clutch of ebay, was happy...

the place that sold me a RD28 gear box tells me it will fit a RB30
the mechanic who is going to swap it for me says they are different

who is telling the truth?