OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

Search:

Type: Posts; User: nissannewby

Page 1 of 20 1 2 3 4

Search: Search took 0.10 seconds.

  1. 255351LB5A That's the part number. There are...

    255351LB5A

    That's the part number. There are plenty of places online or as above nizzbits. The stealerships will charge you a mint for one. Can be had for under $50 from the middle east
  2. Replies
    113
    Views
    11,996

    Exedy Safari Tuff HD, UFI Clutch or NPC viper...

    Exedy Safari Tuff HD, UFI Clutch or NPC viper clutch. The first 2 I would recommend lightening the flywheel and balancing the mass. The NPC comes with a nice light flywheel and should be balanced.
  3. Replies
    104
    Views
    2,888

    Small ports I think are used when EGR was fitted...

    Small ports I think are used when EGR was fitted hence being black. Non EGR intake manifolds just don't have a port so it gets blanked off. I could be wrong here.

    The small canisters. The one in...
  4. Replies
    9,135
    Views
    786,203

    There is a bolt with a sealing washer on it...

    There is a bolt with a sealing washer on it inside the reservoir that holds the reservoir to the pump. These can leak when they get old and also if the bolt is a little lose. You coukd try nip it up...
  5. If what you say is true and you dont go over...

    If what you say is true and you dont go over relief then you could also use a slightly smaller motor to increase winch speed as well. You currently have just over 900nm available with you current...
  6. Ok so your running at around 165 Bar which...

    Ok so your running at around 165 Bar which requires just over 13kw. So lets say 14kw requirement. This is if I have calculated your pump rpm right (approx 1500rpm) which will be putting out 48LPM at...
  7. Replies
    12
    Views
    700

    You do realise that means the other oil worked...

    You do realise that means the other oil worked better than the penrite? Diesel oil has detergent additives and other sort to keep to carbon and whatever else suspended in the oil. So if the oil is...
  8. How much pressure does your system run? If your...

    How much pressure does your system run? If your current system runs say at 100Bar then you will need 3kw at 17LPM. If you want to run 50LPM then you will need 9kw of power. If the pressure is...
  9. Replies
    31
    Views
    3,704

    I must reall be a lead foot compared to you guys....

    I must reall be a lead foot compared to you guys. The best we have ever got out of ours is high 15s per 100. I have found the worst fuel economy has been for the daily commute that the wife does.
  10. Replies
    143
    Views
    17,289

    Took it out yesterday to get some feed for the...

    Took it out yesterday to get some feed for the horses. 80 bales to get through winter. I have had a worked td42 but nothing compares to how well this thing tows. Its so edfortless and comfortable....
  11. Replies
    143
    Views
    17,289

    Got the rack on late last year. Then gave the big...

    Got the rack on late last year. Then gave the big girl a tub before we went away after christmas. Did a fair bit of driving and the car averaged 17/100 loaded with gear on the rack.

    77908
  12. Replies
    34
    Views
    1,142

    Agreed. The 60 is a classic and hard to find....

    Agreed. The 60 is a classic and hard to find. Patrol utes are a dime a dozen so if the need ever arises can be replaced easy. Not the case for the 60 though.
  13. Replies
    1,279
    Views
    153,010

    Sticky: Yes best to crack the injectors on install to...

    Yes best to crack the injectors on install to bleed air.
  14. Replies
    1,279
    Views
    153,010

    Sticky: Yes but either way you will need some port of...

    Yes but either way you will need some port of escape for the air either being a disconnected hose/line or an air bleed nipple. You can generally get away without disconnecting anything with an...
  15. Replies
    1,279
    Views
    153,010

    Sticky: If you have the lift pumped hooked up to ignition...

    If you have the lift pumped hooked up to ignition the hand pump is kind of redundant. But also not unnecessary, as of you have a failure of the lift pump for whatever reason then you can still prime...
  16. Thread: Rip roofy

    by nissannewby
    Replies
    194
    Views
    17,211

    Not news you want to hear on holidays. Was such...

    Not news you want to hear on holidays.
    Was such a privilege to have met roofy and help him out. There isnt much else to say everyone has already said.
    He was a top bloke which the world will...
  17. I was not aware of the capacity of the chev pump...

    I was not aware of the capacity of the chev pump in my statement. I have since had a look and the best I can find is a mech driven 130gpm. Which is a large quantity of water. A lot of the problem...
  18. You cant really have too much flow. Maybe if the...

    You cant really have too much flow. Maybe if the system cannot handle the amount of flow going through it. The temperature drop across the rad will remain much the same irrelevant of flow. 10 degrees...
  19. Replies
    1,279
    Views
    153,010

    Sticky: A carter 4601 pump is also a good option as a...

    A carter 4601 pump is also a good option as a lift pump.
  20. Replies
    1,279
    Views
    153,010

    Sticky: Can be calculated from the hp you want. At...

    Can be calculated from the hp you want.
    At 200rwkw you will want nothing less than 150L/hr. So you would aiming for higher so 200L/hr. So if you have a target hp then it can be approximated.
  21. Replies
    1,279
    Views
    153,010

    Sticky: Chev pumps are a peice of cake. They are pin...

    Chev pumps are a peice of cake. They are pin timed. You do have a small amount of adjustment for timing but not a lot. Line the marks up. Pull the pump off. Line the pin up and put the new one on.
  22. Replies
    627
    Views
    56,583

    Would you like some assistance with this hodge? I...

    Would you like some assistance with this hodge? I can get most of what you need to mount it for not much more than that turbo price alone.
  23. Replies
    520
    Views
    44,911

    I have your readouts. You have a difference of...

    I have your readouts. You have a difference of pretty much the same as the ones I posted above and the same as darrens vs rossco. While there are subtle differences between the td engines the one...
  24. Replies
    520
    Views
    44,911

    This is the closest thing I have to be able to...

    This is the closest thing I have to be able to show you the difference. These 2 patrols have a very similar setup. Both bw turbos, both ruben 12mm, both front mounts.
    Laying them over each other...
  25. Replies
    627
    Views
    56,583

    This is the closest thing I have to be able to...

    This is the closest thing I have to be able to show you the difference. These 2 patrols have a very similar setup. Both bw turbos, both ruben 12mm, both front mounts.
    Laying them over each other...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4