Thanks mate!
Type: Posts; User: pete57
Thanks mate!
Hi guys,
My Y61 has a slow leak from the master cylinder. I thought I might as well replace the slave cylinder as well, so I've got both. Should I do them in any particular order? Or something else...
Hi guys,
Any thoughts on where to source a water pump to my 2011 (the one with the viscous fan clutch attached)
I have found prices ranging from $89.00(US) to $550.
Thanks
Yes, did so and still fan is still not working properly. Definitely bad.
Any idea from the pic what that oil leak might be? (what is that plug between the crankshaft and the compressor?)
I don't know if the dashboard was removed I left it one day, picked up the next. The AC guy didn't mention the pressure switch, just told me that the pressure "smashed" the evaporator and will...
So, I finally had some time to check under the bonnet. What the AC-guy meant was that the radiator fan that is attached to the water pump via a coupling is slipping a little bit and not spinning...
Yes, it is electric. Spinning, but apparently not enough.
Hi guys,
I had the AC repaired on my 2011 Patrol (Y61/GU with ZD30 engine)
The AC repair guy mentioned that, when idling, the AC pressure goes too high due to the radiator fan not working (cooling)...
Thanks guys. Shall try it this weekend. This site is a goldmine.
Pete
Thanks for your trouble. I did find the specifications on the net and it is grade 8.
Yes, took in a sample, but they don't stock grade 8 M12 with flange and shank. The bolts look ok, but the nuts are shot. Does anyone know a good online supplier?
In re. to my post about the slip joint locations, it is now time to reinstall the shafts. I am looking at replacing the existing nuts and bolts. Can anyone recommend where to get them? Nissan is of...
Yes, all unis done. Thanks for all the help.
Pete
Thanks. Same with the front shaft?
I'm replacing the joints on the prop shafts and got a bit confused. Are both the slip joints supposed to be facing towards the rear of the car (like the rear shaft slip joint closer to the diff than...
Hi guys,
I'm in the process of changing the universal joints on the drive shafts and greasing the slip joints. Can anyone help out what grease to use?
Thanks guys, I shall check the resistor pack.
Hi guys,
The A/C (and heater) fan is not working on the first three levels, but goes to full on level 4.
Any ideas? My thinking is that the motor is on it's way out and requires full voltage to...
Thanks guys,
I do have one key left (with remote)
Shall definitely check insurance.
Hi guys,
I have lost one of my keys (with remote) to my 2011 patrol (3.0)
Just went to the key man in our shopping centre who quoted me $119 for just the key, no remote!!!
Can anyone direct me to...
Thanks. Both of them were landcruiser owners, might have something to do with it.....
Hi guys,
This has been debated before, but I still don't find a satisfactory answer.
Part of the deal when I bought my 2011 patrol was for the dealership to correct a pretty heavy pull to the left....
That fixed the problem. Thanks heaps.
Peter
Hi everyone,
Yes, I'm a newbie to this forum as well as just having bought my first 4WD, a 2011 3.0 diesel, some time ago. As I encountered my first problem, I thought Google would lead me in the...
Hi guys,
I have just changed oil and all the filters on my 2011 patrol 3.0 diesel. When I started up the car the malfunction light comes on. From what I've read, this indicates water in the fuel...