Cleaned 3 months worth of kids snacks, spilt drinks, packaging and dirt out of the seats, carpet and booster seats.
Went hardcore today....:icon_bonk:
Type: Posts; User: robbo0001
Cleaned 3 months worth of kids snacks, spilt drinks, packaging and dirt out of the seats, carpet and booster seats.
Went hardcore today....:icon_bonk:
Cleaned MAF, blew out air filter, tightened every 10 mm bolt in engine bay. (Cos it was to far to shed to change the socket to another size)
Beers were cold though.maybe that was the reason?
http://i380.photobucket.com/albums/oo244/blueydog/CUP2_zps74955c1b.jpg http://i380.photobucket.com/albums/oo244/blueydog/CUP1_zps0ccd31bf.jpg
Cupholders....hold 2 large coffees no worries,...
Had a "clunk" while on the beach at Bribie, in the front suspension....today removed front sway-bar, and re-checked all suspension bushes and nuts.
Test drive tomorrow...footy and beers now
...
Put in some decent cup holders, courtesy of Bunnings and the Internet.
8 bucks, a heat gun and some Triple M trim Paint.
No more dropping brews on the gear boot and carpet.
Should have done it...
New front shocks picked up and fitted...
Finally the lift is finished, now I just need to raise my external garage so I can get out with the roof racks.
Fitted a remote keyless entry system and a new door solenoid, tidied up all the originally crappy wiring under the dash.
Pressed the lock/ unlock buttons 900 times...just to make sure it worked.
Discovered the drivers door lock is stuffed, locks all doors apart from itself.
Will pull door card off over weekend and have a look.
Haha stupid IPhone...spelling still shite.
But ya get the drift...
Cheers
Still getting excessive dirt in filter housing after replacing the foam seal in the top of the air cleaner tub. Pulled inner wheel arch trim and front Passenger wheel arch trim off... To find the...
Nice looking rig mate...bet the cash card is still smoking:smiley_thumbs_up:
Finished the winch install off, managed to squeeze all my recovery gear into a nice water proof space case.
Unfortunately that grommet in driver side footwell is still leaking water via engine...
"what about a strip of hi density foam?"
Didn't think of that mate... Might give it a shot tomorrow after a visit to Bunnings.
Cheers for the input
Pulled air cleaner out to have a look, still got dirt and water getting into filter housing. Lo and behold half the OEM rubber seal is missing from under the lid. Dunno whether to go Nizbits or try...
Pulled up front drivers carpet to find a water leak. Located a leak in main wiring harness grommet above accelerator pedal in firewall... Filled it with sikaflex and binned all the wet underlay. Used...