Fitted the hydraulic hoses for the winches thru the air fed cooler, another fiddly tight as hell job done and dusted. Struggling with the effects of going onto blood thinners and every knock and...
Type: Posts; User: PeeBee
Fitted the hydraulic hoses for the winches thru the air fed cooler, another fiddly tight as hell job done and dusted. Struggling with the effects of going onto blood thinners and every knock and...
Wouldn't it be great to have a shed organised with all that NP gear, at your fingertips, instead of my debacle of a storage system that starts at the floor level and reaches the first shelf purely by...
The guard was in aisle 17 at my spares location - inside his shed! He didn't have to look far, just ask.
Keep me in mind toiger when you get to the front guard rails as I need a set once my sliders are welded up and fitted, but months away I reckon
Fitted a wide angle reversing light, bought it from Paul at Ledlights.com.au, great quality, and pricing, yet to fit the canopy white/orange lights.
Also fitted the new cruise control today, pretty...
Its funny, I was sitting in the waiting room whilst they worked their magic and the clientele were all old bastards like me - just so obvious, looking for a straight solution without fanfare. he...
Took the barge down to @MB's recommended muffler guy in Lilydale, excellent outcome, fixed up the problem i had generated in under an hour, pragamatic service, Lilydale Towbars and Mufflers - highly...
Yep Jenny is already onto it! Get the greasy look everytime it dingles!
I am not buying one more thing for my Patrol - hahaha, what a load of crap!
I am going to start one. The build has probably been the worst kept secret on the forum in all honesty, but the initial events and ramifications of the event that triggered the rebuild have remained...
Already booked in for another lobotomy as there is no chance I am getting talked into doing this again, might even get the ears sewn up as well after they plug 'em with peanut butter!
Always someone in the crowd that does it right!!! Yes you warned, yes it stung hard. I also spent 4 hrs trying to find the PTO cover boot, search the world for a replacement, only discovered recently...
You are correect, what are the chances? I can only assumed I f**cked it all up, per usual, and simply selected the wrong set from the multitude of buckets in the shed. The other brackets, including...
Righto, another workfront. I had issues fitting the ARB BP51 stone guards. Turned out after ringing ARB, I was missing some small split wedges, however I was not convinced these would work, as others...
ok, would you believe there are 3 versions of the same catch? Yes, well there is and I have one pair of each. I found the third set this morning after stewing over the impossibility of the catch not...
Thanks Plassy, its fighting me right to the end. Spending 6 hours solid trying to think and react without a positive outcome, its exhausting, far worse that doing the physical. The journey has had...
Bit of an odd one. I have done a body swap and chop on the GQ. The original car was a 1997 model and I have used that interior. The donor was a 1991 body, that was chopped. Today I started the final...
Cut 8mm off the ends of both brand new RCV cv and axles just purchased because they are supplied too long from the factory. Circlip groove has already been recut to suit the right location as well,...
@MB, all the pots look like they have that boomerang flare mark like a stain - is that water or typical? Goes from cylinder to bolt hole x 6 - very interesting.
Yeas, bought in 1990, only played around with it in the back yard, one of those 'what a great idea' purchases. I tried one of the Uniwelder setups as well, the modified 12V alternator that was rated...
What a nightmare this has developed into.
Bought two x 100a/hr Itech lithium batteries for the truck to replace the 3 x 130a/hr AGM's. saved 100kg of weight. Bit of a waste in some regards as the AGM's are only 12 months old and fully...
One thing is for sure they should come apart a lot easier than when I re-co'd them!! Its not a big hassle for a man of your capability, only time.
Pay it forward Mark, doesn't hurt to help anyone in a time of need. You are a constant help to me and many others on this forum, so swings and round-abouts I reckon. Hope the latest challenge is...
No its the get the plate inside the cross member and lift it upwards to align with the holes in the chassis rail then hold the bracket in place while you screw the bolt in, all done under fatigue and...