Search:

I don't get any movement in my doors...( that I am aware of )..I have just done the rubber stoppers at the bottom of the doors..that is what did really stop movement...they were gone..you can use any...

shiiiieeeet !!

there is a thread up at the moment Zak with a pretty nifty way to fix that

yeh cheers Westy

followed a mate and got him to sit on 100klm...now my speedo read 100klm the same as him...the GPS read 100klm and still with the 33's on ????...so now all different from before....go figure ...so I...

yes..exactly what I thought that's why I asked ...so I just elect to drop 10 klm off the speedo reading and sit on that to play it safe...maybe the GPS isn't reading properly...it is a Garmin Nuvi...

so does that mean that with the 33'3 on I am actually going slower than the speedo ?..the GPS shows 90klm when the speedo shows 100klm...I thought it would have been the other way round ??..actually...

this is 33's against standard suspension..I suspect also with an element of sag...wont fit...needs a lift definitely..
and with a -21 offset...too much ...stick out from flares about 15mm

Cheers thanks Meh..

where do you get the mirror camera thing Meh ?...does it display the distance left in the mirror with audible sound etc when you are reversing ?..how much was it if I can ask ?..
Do they just...

fitted new mesh stone guards to headlights ....late yesterday now.
39856

I lost 2 putting the uhf in...I think they are mine !!..:D

you have to love cable ties....I wish I had designed them

also as a matter of interest and to maybe save people having to go through the process...the accessorary wire from the back of the ignition is the blue one with a red tracer...there is only one....it...

will use the missile switch as an isolator...red light as active indicator ( which really doesnt matter...you know when you activate a missile switch...just good for other people who may put...

bought one of these from jaycar...38356


intend to use it for the winch..removed starter button ...expanded hole and put in and out rocker in it38357

going to put it here...now just have to...

where do you get that stuff mate ...and does it work ?

I sold it to buy a new motorbike TPC...It was just one of the classic cars I put time and money into...It was originally an ex PMG ute....I bought it already painted red and with the 351 windsor in...

nah not yet mate...putting it together to long term tour...but hope to eventually..the engine bay was pretty clean when I got it...with all the head and manifolds off it made it easier to detail...

put the new head on
37569

adjusted the tappets..put the inlet manifold extractors and plenim on..new water pump...starting to become a motor again....now too remembe

fitted a complete new 2 1/2 inch exhaust system from extractors to tail pipe...all the big fellas as in Beaudesert etc couldnt put together a system for a petrol that was bolt together and send it to...

fitted the rear superior panhard rod...removed the gas system and re-fitted the original air intake ..

Finally starting to put all the bolt on's in place..picked up the bullbar today...started late with putting in the 2' lift with new KM2's and so only got the front done ..ended up having to finish it...

was the vibration in reverse BA ?

Did nothing to it today...left it up north to fend for itself getting its roadworthy

[QUOTE=thebeatjackson;191022]Replaced all the door trims, fixed the power windows and mirrors, fixed the horn and windscreen washers, removed the old wheel flares to make way for new flexy flares,...