Search:

Cool tank, what brand is that & capacity?

Awesome.

I took 2 trailer cargo mesh's toi Cape York and back, never used them, never opened them. Took them back to Bunnings and got my money back, no questions asked. I hosed an Ozito tool...

Yep, the thing to look out for is whether the cable between the battery and the fuse is likely to interfere with anything else and cause a short. You could have the two seperated by a mile if you...

Here's the stand I use for my Engel. The stand connects to a mount in the floor underneath it and the shelf behind it.

I use straps through the handles which go around the frame of the strand.
...

I've been watching that Phil, I love brain busting stuff like Constellation. I've had trouble working it out as it went along, but been addicted to it. Now we have to wait for season 2 I guess. Don't...

I'm pretty sure in the past I used a similar setup protecting a similar load and my main cct breaker was only 60 amps.

And as BrissieBoy said, keep all your fuses as close to the battery as...

If the fridge has handles, tie it down with them. You could connect the strap you use to connect to the 2 bolts at the front and someplace at the rear. If you just tie down the front you may find the...

Hey, no apology needed. The best thing about solving problems yourself is that you remember what you discover. If you get told, you tend to not remember it as well, that's what happens to me anyway....

bloody awesome Daz. looks like you fellas had a great time. well done mate.

I had an exhaust jack years ago. It was great, easy to use and safe. It hit the exhaust pipe one day and got a hole in it, so that's one issue. Other issue was it tended to become dirty from exhaust...

finished side one of my front axle rebuild. not done this before, not a hard job, but a few new things to me. taking my time, doing it right and learning lots.
found out some seals had been...

Nope, I got it wrong.

It's an alignment spacer that sits in the auto hub body. It helps to centre the autohub up with the hub, it stops the autohub slipping around on the hub within the free space...

Quick update for others. It's called an egg hub spacer ring.

I've read that it's not required with the auto hubs, only the manual hubs and vice versa. My Patrol has (modified) auto hubs and has...

Pulled apart the drivers side front hub to replace axle seal and other stuff.

Was removing the bearings out of the front hub and this fell out:

87886

It's not a bearing race, it looks like a...

Do you have to hold those flexi hose ends on??? I thought they'd all just clip on???

turned my falcon ute into an EV on the weekend.


left the ignition switched on overnight, now I gotta wait 12 hours for the battery to charge.

I want to buy a grease gun. I had one about 20 years ago and all I can remember is that more grease came out of it than went into the thing I was greasing.

Any recommendations, gotta be under $100.

Hey what's Temu like Daz? Isn't it like Alibaba? Did you have to wait long for the stuff?

That sounds great Cuppa.

When we went to Garik Gunag Barlu NP in 2021, we were going to head up to Kalumburu, past Drysdale River Station, on the way home (a bloody long way home) but the humidity...

Well that's interesting, we went down the Maytown 'guttered' road and through that creek at the bottom, it was dry. We continued to follow that track. At one point after the Cemetery I think it is...

I actually learnt something doing that track. I'm now going to pass on lots of these iconic difficult tracks, I'll use the OCR as an example of the type of track I'm talking about. There's no way of...

Yep, I believe that. We stopped at a creek, can't remember it's name now, it was around half way point on the track. There was a shack and a big earth moving truck of some type. They won't be getting...

Yep, your thoughts were identical to mine. We discussed turning back, but then we'd have to tackle the rock steps and everything else, we'd just conquered. Before starting, I thought, "I've done the...

Thanks Mr Mudski. Think I'll purchase a set of 'pullers', if I don't use 'em again, I can flog 'em on Fazeberk or similar and get some money back on 'em.

Not changed these before.

GU with auto hubs.

Done about 5000 Ks with a very leaky seal on the drivers side. I'm expecting all the grease to be stuffed.

Been watching some YT vids and the...