Great feedback every1 cheers heaps! Very much appreciated input and i will be keepin my eyes peeled! Juz another thing tho, wot difference would fittin 35s, few inches of lift, sum rear draws, 3/4...
Type: Posts; User: Breaks
Great feedback every1 cheers heaps! Very much appreciated input and i will be keepin my eyes peeled! Juz another thing tho, wot difference would fittin 35s, few inches of lift, sum rear draws, 3/4...
Gday im just tryin to get sum feedback on the 2.8 turbo diesel in the GU. Is it any good? Sounds like a small engine for a larger 4wd?
Done the fuel filter as that was 1 of my suspects but hasnt made a difference. Vac lines r all connected also. Im stumped? Leads n plugs r good as were changed bout 5000k ago.
No from wot i can c i havnt moved anything? I hav found that it only does it while running on petrol tho!?!?
Gday, ive just flushed and replaced the clutch fluid in my rig and now im noticing a really bad lag between 2000 n 2500 before power picks up and car starts revving again.
Is it spark plugs, leads,...
Gday guys, juz after sum opinions on the VH45 motor, any good? Ive found one with about 80,000 on it bolted to a gq auto box with the vh internals which has done bout 60,000. Would it be worth a look...
Gday guys, ive been tryin to price up clutches for my TB42 gbox and im juz wondering wot the difference is between heavy duty and 4 terrain clutches are an wots better? Any other options i should be...
Gday guys, throwing out an expression of interest question.
Ive juz found out today that my TB42 gbox has given up the ghost and is guna cost me 1500 to get the rig goin again. My motors the TB42...
Hey guys, im thinking about a tb42 conversion to td42.
First of all ive tried searching the site for previous related threads but it wont let me open them so im at a bit of a loss. I juz wana no...
Ur a superstar mate, cheers heaps!
Yeh sorry, petrol motor on gas. That sounds alot better than a new clutch. Where abouts can I find a vacume retainer tank, who sells them? (I'm in Perth). Is there any way to test if that's def the...
G'day guys I just Have a question about the clutch. When the revs are up over 2500/3000 rpm the clutch seems to get really heavy and seems like it's sticking especially between 2nd to 3rd and 3rd to...
Thanks every1 for ur help, and my apologies for any frustrations with stupid or repetative questions. I don't expect any1 to do the searching or work for me, but do appreciate bein pointed in the...
Ok cool, now how do I get the grease in there??
Hey guys juz curious as to wether the swivel hubs need grease or oil? Mates mq uses grease but his missus 80 series is oil. Wots right for the GQ?
Thanks guys, doesn't seem to hard after quickly skimming thru that link. Would any 1 hapn to no if it's possible to run gas and petrol with a turbo set up? All the ones I've seen have either been 1...
Gday, have been thinkin about bolting a turbo onto my rig and have looked at a few diff options with carby and efi and it seems that efi is def the better way to go for general allrounded goodness. ...
Where would I get an adapter from? Or would I have to modify sumtin to suit?
another gauge question...
the aftermarket water temp gauge sensor is huge compared to the pissy lil factory sensor and wont fit in the hole, do i : -
1: drill out the original hole with a...
thanku mate, saved a heap of muckin around!
Where's the original feed from the dash go to on the block?
Hey guys where do I plumb my oil pressure gauge into on the block?? I don't wana pull sumtin out if it's not right haha. The closer I can get first time the better! ;)
i thort a 6 was a bit over the top, only reason i was considering it was cos i can get it for same price as the 4, thats also why i asked for opinions and there much appreciated.
ive heard only...
how do u find the ride on the blacktop without sway bars??
i no thats the better option but there guna cost more than my entire susp setup!!! :P lol
also, can i still use my rear sway bar disconnect lever with a large lift?