OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

Search:

Type: Posts; User: billyj

Page 1 of 16 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    5
    Views
    168

    from memory theres just one bolt at each end that...

    from memory theres just one bolt at each end that hold the rail in place. it will still take a bit of pressure to pop out though from the injector o-rings being tight in the manifold.
    if your hoping...
  2. Thread: Which timber

    by billyj
    Replies
    18
    Views
    452

    the rotten timber is standard pine commonly used...

    the rotten timber is standard pine commonly used for house framing there are many spiecies of pine and yes some do look alot like oregon, the milled finish is known as laser cut. if you read the...
  3. looking at the pics someone has made aa total...

    looking at the pics someone has made aa total mess of the intake pipe, pcv lines and vaccum hoses, id suspect the reason it wont idle is air leaks. to confirm if you unplug the air flow meter on the...
  4. when i turboed my old tb42e patrol i just drilled...

    when i turboed my old tb42e patrol i just drilled and tapped the hole and installed the fitting with a good coat of locktite hyrdraulic sealant and it never weeped a drop in the 5 years before i sold...
  5. Replies
    1
    Views
    194

    cant say ive heard of many, most go down the...

    cant say ive heard of many, most go down the turbo path.

    what kind of issues are you having
  6. Replies
    4
    Views
    350

    as above its the window reg that has failed, they...

    as above its the window reg that has failed, they are the same for both power and manual windows
  7. Replies
    6
    Views
    506

    if you want good sound from a tb42e add a turbo...

    if you want good sound from a tb42e add a turbo then run a 3" straight to the back with highflow cat and thank me later
  8. Thread: Chainsaws

    by billyj
    Replies
    82
    Views
    5,098

    couple of pics from the weekend, cleaning up one...

    couple of pics from the weekend, cleaning up one of the many stringy's that have fallen over lately7893978940
  9. Replies
    1
    Views
    283

    its pretty normal to not go any higher, 1/4 was...

    its pretty normal to not go any higher, 1/4 was about 82-83 deg, with half being about 87-88. you dont need to worry unless it hits the red
  10. Thread: Chainsaws

    by billyj
    Replies
    82
    Views
    5,098

    got about half a dozen stump/root balls laying up...

    got about half a dozen stump/root balls laying up the front, ill try grab some pics tomorrow
  11. Thread: Chainsaws

    by billyj
    Replies
    82
    Views
    5,098

    haha no council watching here, cutting on my own...

    haha no council watching here, cutting on my own property, but will have the ppe on anyway
  12. Thread: Chainsaws

    by billyj
    Replies
    82
    Views
    5,098

    not sure what the timber was in the pic mate, was...

    not sure what the timber was in the pic mate, was taken a couple of years ago, just remember it was bloody hard and burnt really well.
    got a fair bit of stringy laying on the ground up here atm so...
  13. Thread: Chainsaws

    by billyj
    Replies
    82
    Views
    5,098

    personally im running a pair of makita dcs7901...

    personally im running a pair of makita dcs7901 saws, 79cc running 20,24 and 30" bars, for both track clearing and firewood duties. had one for 10 years and it had been such a good saw that i couldnt...
  14. Replies
    9
    Views
    7,467

    after using hpr 30 in my old patrol for years i...

    after using hpr 30 in my old patrol for years i switched to penrite hpr diesel 20w60 purely because it came in more convenient 10l drums. bolted a turbo on it at 360k kms and sold it at 450k and it...
  15. using the hot value on a cold engine wont do any...

    using the hot value on a cold engine wont do any harm it will just leave you with more clearance than ideal, my thoughts are you have probly got a bent valve stem or 2 given you bent the push rods...
  16. Replies
    9
    Views
    962

    i had a much smaller turbo came in a kit from axt...

    i had a much smaller turbo came in a kit from axt turbos, i set mine up to make boost more or less from idle yer it sacrificed a little power up top but had tons of torque down low more like a diesel...
  17. Replies
    9
    Views
    962

    do a compression test mate, if the numbers come...

    do a compression test mate, if the numbers come up good and it doesnt use any oil id have no issue bolting a turbo on, i put one on my old tb42e gq at 390,xxx kms and sold it 3 years later at 460k...
  18. Replies
    3
    Views
    545

    6-2-1, having the pulses from cylinders at the...

    6-2-1, having the pulses from cylinders at the opposite end of their cycle helps keep gas speed up through the collector which helps scavenge gases as the exhaust valve opens.

    6-1 would be more...
  19. Replies
    4,842
    Views
    423,947

    new tools after theving c@#$'s cleaned out all...

    new tools after theving c@#$'s cleaned out all my spanners socket sets etc from my ute sunday nite
  20. Replies
    13
    Views
    967

    a gq will pull 2.5t easily, used to tow 2 ton...

    a gq will pull 2.5t easily, used to tow 2 ton daily on mine which could blow out to over 3t easily with a good load of timber onboard
  21. Thread: Gearbox oil

    by billyj
    Replies
    10
    Views
    2,997

    im normally a penrite man but the castrol vmx-m...

    im normally a penrite man but the castrol vmx-m was the only oil that got the old girl shifting any good
  22. Thread: Gearbox oil

    by billyj
    Replies
    10
    Views
    2,997

    always ran castrol vmx-m with a tube of nulon g70...

    always ran castrol vmx-m with a tube of nulon g70 in my gq, was the only oil i tried that made it shift any good
  23. Replies
    5
    Views
    2,604

    -22 will be about 10mm out, -13 was spot on whn i...

    -22 will be about 10mm out, -13 was spot on whn i had my gq
  24. yer its a little scoop for cooling, the cut out...

    yer its a little scoop for cooling, the cut out for the caliper is larger as well
  25. yep caliper, caliper bracket, disc and backing...

    yep caliper, caliper bracket, disc and backing plate is all you need and it will all bolt straight on
Results 1 to 25 of 377
Page 1 of 16 1 2 3 4