Drain pipe roughly 500mm long.
Might be closer to 125ml. Just looked like a lot when I drained it. Will measure the amount properly next time..
Sent from my iPhone using Tapatalk Pro
Type: Posts; User: paulvdw
Drain pipe roughly 500mm long.
Might be closer to 125ml. Just looked like a lot when I drained it. Will measure the amount properly next time..
Sent from my iPhone using Tapatalk Pro
Just checking if a catch can is effective without blocking the egr?
I have installed a catch can and after doing around 1300km there was about 300ml of oil in the catchcan drain pipe.
Sent...
Josh
I bought the Titan drawers and am really impressed with the quality..
Regards
Paul
Righto guys. Replaced tensioner and belt. Noise still there..😬. Will the exhaust manifold leak only make a noise at a certain RPM? The noise only occurs at around 2000 rpm then stops at 3000.
Thanks Guys. Looks like a tension wheel bearing. The only one that has excessive play..
Hi All
I have just done 3800km from NSW to Tassie and back over 16 days. I have a GU 3.0ltr CRD. Around 5 days ago the belt started screaming at 2000 to 2500 rpm no squeeling above or below this...
That's awesome info guys.. Thanks
Hey three dogs where did you get your brackets from?
Hi all
Just interested to hear what brackets you are using for light bars on the standard Nissan bulbar. Mounting on the top part above bonnet?
Cheers
Paul
Hi all
I was wondering if there is anyone that may have doen some research on the winches availale on the market and which is the best value for money and quality.
I am looking to invest in a...
Hi All
Just been informed today that my Patrol's front wheel bearings have had it.
Any advice on changing them myself?
Is it much of a task?
I am thinking it is probably worthwhile doing the...
This is an awesome thread mate!!!
How does it work ?? Is it strong enough? Have you given it a good workout yet?
Regards
Paul
Am I best to search the forum for the mod?
How much involved in removing auto hubs?
Cheers
Paul
Hi all
Just wanted to know if anyone has had this before?
I have a gu 3.0 patrol 2008 model.
This happens every so often. No consistency when.
After backing up and driving forward there is...
Thanks Threedogs
I have placed an arrow where the nut was that was loose. Could only see the movement if you watched closely while someone moved the steering.
Cheers
That's what I did. Pulled off and inspected. Nothing found apart from some rust. Greased up and replaced securing the nut.
Mine looks quite different to the pic Gaddy. I have a 3.0 L GU patrol.
I am thinking it is the tie rod.
It is attached to the front diff on the passenger side.
This is where the knocking was...
Hi all
Just wondered if anyone else has experienced a knocking sound on the passenger side when turning the steering wheel from left to right?
You can feel it quite prominently if you sit in...
The nissan guys are quoting $55 for the part and around $120 for the labour. So can't be too big a job?
http://www.nissanpatrol.com.au/forums/images/imported/2013/09/50.jpg
Hi mate
Picture attached.
Cheers
Paul
Hi All
How difficult is it to replace the front diff pinion seal on a 3.0lt Gu?
Cheers
Paul
Mine does the same. Seemed to be more noticeable after I had a chip and exhaust kit fitted though ?
Has anyone got one of these?
I am wondering if you get any off road maps for it?
Cheers
Paul
Hi All
Just wondering what the max Amp Hour battery has been fitter to a 2009 GU patrol?
Cheers
Hi All
Just curious about the general rule of thumb on tyre pressures. Both on road and off road. Psi or kg/cm2,
Or is there no rule?
Does the manufacturer determine this?
Cheers
Paul