Sharen had it done to her CRD and was very impressed
not sure if the new owner thinks the same king-ady1
Type: Posts; User: threedogs
Sharen had it done to her CRD and was very impressed
not sure if the new owner thinks the same king-ady1
As I said it allows the ECU to reset back to OE values,
and not maintain any new values due to dirty maf etc.
seems to do the trick
Some dis-connect the battery while they
clean the Maf allowing the ECU to relearn/re-set
spray the Maf you may not be able to see the fine film of oil residue on it.
You may be surprised the difference it will make.
Supercheap and JayCar sell Maf cleaner
Maybee look at fitting a...
From memory I thought they had an "O" ring to seal it...
@ Boosh I'd be looking at radiator related problems. hose the bottom
of your radiator, as mud dust etc tend to block the lower half, go gently
as carwash doovas can be a bit high pressure for my...
You're on an old thread here don't think some of these guys are still around.
You may find you need to open up Dawes so there is less PSI for the time being
Use your thread for Dawes Questions, I...
You can clean it any time, spray heaps at the wire, DO NOT TOUCH wire with fingers or anything else.
Just make sure its dry before you re install it, While you're cleaning it some ppl dis connect...
You can just clean with MAF cleaner from SCA, just make sure its dry when you replace it. If
you decide to buy another keep this for a spare. and yes a catch can will prevent fumes fouling the sensor
Theres a 4 pin and 5 pin, I'll get you a part number for 5 pin $115 on fleabay
back again like magic, pt no on box is 22680-AD21A