Search:

MB thanks mate trial coming up going in for another procedure next week
Have stock of most points, might be better to email me at the Gmail address

Hi mate plenty here just PM for a price

Do you think the same as Hodges would fit, check his biuld thread sorry its been so long but you know....... MudRunnerTD

Royce heres what you want to make life easier Imho.
First get the boost set, then you can attempt some of your
other problems
...

I think now the ones like hodge has now might suit yours better,

you could sell your to GU bigfish if they are suitable, just a thought

Check Hodges build thread and see if you have the same set up.
No one else does this set up so would like to keep it that way please
email me at outback ideas at gmail dot com

I have front points for other 4x4s that have 25 mm spacer
with no problems they are held in situ via 3 x 10mm bolts

I dont think 80mm will cause a problem, happy to wait ,lol

What year ute do you drive and what was the original motor??

Hi mate I should have put this here months ago when I finallised design on Erics 4.2 2006 model
Anyway here are a few pics, only thing is a small piece of about 20mm will need to be trimmed off one...

leave it with me should take to long, as well s helping the
fridge run more efficient it might keep the ppls away from looking in.
I know they work I did it to my troopy

OK I have the suction cups for my newest product, and would like expressions of interest.
product is a false window for the inside of the cargo window. This will be the same shape as the window and...

Just brought a truckload of double sided suction cups , these will make it easier to fit the cargo window protectors.
Seeing as you'll be packing to the roof Im getting them cut in black perspex...

Had a bit more time to think about this switch panel ,,,,,,now Im making it out
of 1mm 304 stainless, it will just super glue into sitchu, easy as.
It will provide slots for three carling and one...

Finalized the drawing for the switch panel so if any one is interested just PM.
Im getting a 3 carling switch panel cut for the GQs and a 3 carling switch and 1 toggle switch for
the GUs, the...

Grade 8 is about the highest joe blow can buy without going to a specialist bolt outlet.
A 12.9 bolt would cost a small fortune imo and a grade 8 will have a very high shear factor.
But all this...

Thats got angles on it eh Winnie, if that was the case I'd need to make it from 1mm aluminium
not sure that would work looking at that pic.

@ Growler that switch panel on the centre console those...

Ill need to see one first preferably from a GU , but GQ is still ok.
I have no plans on pulling my console out anytime in the future but
maybe Eric might be doing his soon.
Just need it traced...

@ Kallen OOI is your panel blank mine is for an ST
I wonder if the more up speced ones use those knock outs.

Ripper the later panel is the same, not worried about that small angle.
You'll hardly notice it once the replacement panel is in place.
I get 230 can you measure from the 100mm mark and see what...

Thats great thanks not all have power windows Id say.
204 x 35mm would fit. can fit 3 x carling in that panel
Good to see you have inches on your tape, lol
So I have the GQ and Di covered .

I...

@ Stropp or any others with the later model CRD GU can I get you to
run a tape on the centre console [arm rest] switch panel and see what you get.
The Di is 230mm x 30mm, see previous post for...

Bumped for Winnie or other GQ owners

That space where you normally put the lockers switches
Just measure from the front please trying to make it as
easy as possible for others

Hi all need some help from the GQ owners out there.
Im getting some switch plates made for my GU that
suits the panel on the centre console with a few knock outs for some
switches, as we all know...