Hi Big Gags,
I've been eyeing up the 4x4 treds myself over here in NZ through super cheap auto, they are so much cheaper but as the saying goes you get what you pay for or sometimes your just not...
Type: Posts; User: HippoNZ
Hi Big Gags,
I've been eyeing up the 4x4 treds myself over here in NZ through super cheap auto, they are so much cheaper but as the saying goes you get what you pay for or sometimes your just not...
Hi everyone,
Been far too long since I've been active around here but I'm glad to say I'm back on the saddle with my truck back on the road and on for adventure, as many can relate life sometimes...
Hi all,
I have a safari so most electrics are 24v, there is a 12v feed into the dash which powers the stereo, clock etc but has also been piggy backed off to power aftermarket watertemp,egt,boost...
Does it run fine once started?
I have had a similar problem before and just before I would come to a complete stop I would get a really good thud, turned out to be wheel bearings shot.
yup sounds like an air leak, check the lines first and also the injectors are tight with no leaks and no damage to the washers. also the priming pump has a rubber washer and make sure that isnt...
also check the airfilter/intake for any blockages...
there is also a spay cleaner for pcv, take the hose of and give it a few spays to break up any old oil build up, but from the previous posts it is either a blockage or something wrong in the engine...
There is a fuse from memory its 35amp red one that sits next to the battery in that black plastic case, which should be labelled starter, just double check it and make sure it hasn't blown. Mine...
There is also a nut on the injector pump where you can wind down the fuel, some people wind it up for a little bit extra puff.
I'm in the process of replacing the rear door linings and the back sides with 1mm thick galv sheet steel. Just took off the old lining and used it as a template, got the grinder out and started...
x3 above, boy do they make the difference in the mud. If you've got the power to spin the wheels these bad boys don't flick mud they rip chunks of earth and send it flying lol They do tend to sink...
I've just recently crossed this bridge also mate, LS1 or slap a good tubro on the current TD42. I went the turbo option for reliability, distance and it will suite my purpose as I want to keep the...
And a quick vid in some mud, dam I love my exhaust :)
http://http://i1138.photobucket.com/albums/n537/hipponz/th_MyMovie2.jpg
Hi team,
Just a couple of snaps from a recent trip, the ol girl has had a few things done since her last outing.
New 35" 12.5 r15 simex's, bullbar finished excluding paint and a winch has been...
Hi mate, not sure on your setup regarding the exhaust manifold but is yours a cast iron mold? These are less prone to cracking however do hold the heat more which means the boost can kick in during...
Happy Birthday Andy, appreciate your efforts around here mate. I'll have a can for ya, have a good one.
watched it once, then twice, then got all my flats mate in to watch it. booooofff and the truck is gone, farrrrrrr oouutttt! wonder what the outcome would have been if it were a patrol.......just a...
Congrats mate, hope the day goes to plan and best of luck for the future ahead
Yeah my heart stopped for a sec lol, that man is a very talented 4wder though, knows his stuff.
Here some photos and video from a recent trip, you will be able to see my almost finished bullbar and 36" super swampers and hear the growl of my 3" exhaust. Was a real fun day and since I still...
max talltree.....lol
me soooooooooo hungry, need a pie!!!!
I dinno but its ramping up here!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 12 pack gone, only got merlo wine left oh dear 2mroro morning ios going to suck!!
Now thats more like it mate! dont let me down lol