OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

Search:

Search: Search took 1.00 seconds.

  1. Replies
    3
    Views
    249

    You bought a hybrid hyperflex kit, it will roll...

    You bought a hybrid hyperflex kit, it will roll and dive. It's a characteristic of the hyperflex arms and off the shelf 5 links. This is largely due to the distance between the bushes at the diff...
  2. Replies
    3
    Views
    249

    You can't really 'over grease the bush' as such...

    You can't really 'over grease the bush' as such as it will only take as much grease as can be held by the voids/surface roughness of the elements or the clearance. You are simply reducing friction,...
  3. Nice can of worms you have got there, the H...

    Nice can of worms you have got there, the H bracket you are talking about is sold by Superior because they only supply a certain number of different length dropper arms. I also brought a Superflex...
  4. That's the bolt spacing on the bottom of the...

    That's the bolt spacing on the bottom of the radius arm for the sway bar mount the 'H' bracket bolts to their radius arm then the sway bar mount bolts to the 'H' bracket.
  5. Hmmmm. I thought that "H" bracket was an...

    Hmmmm. I thought that "H" bracket was an aftermarket spacer that bolts to the radius arm to space the swaybar down.

    What exactly are they asking? The distance from the swaybar link to the...
  6. Replies
    10
    Views
    565

    Flip the rear drive shaft. If you have gone for...

    Flip the rear drive shaft. If you have gone for bulk travel you'll need to notch that crossmember too. I had to do that on mine and it'll still touch if everything is extended.
    You'll notice that...
  7. Replies
    11
    Views
    670

    f@#kn air !!! i had a similar problem where i had...

    f@#kn air !!! i had a similar problem where i had air getting into the fuel - diagnosed with a piece of clear hose from the filter to the injector pump , anyway i solved the problem & stopped the air...
  8. Easier to replace the tie rod end on the drag...

    Easier to replace the tie rod end on the drag link. The GQ Pittman arm take the Drag link under and the GU is Over. And a different taper.
  9. The axle load is the same between GQ and GU (1500...

    The axle load is the same between GQ and GU (1500 and 1800 as posted by Pee Bee)... but (there is always a but) don't confuse 'factory' GVM and 'raw' axle loading ratings.
    Factory GVM spec will...
  10. Replies
    5
    Views
    809

    Send your VIN to Nissan and they will send you...

    Send your VIN to Nissan and they will send you back a nice letter telling you. I did this. It is probably hidden in the manual somewhere also. I know my GVM has 2800 for a 2.8TD. I have a GVM...
  11. Replies
    17
    Views
    1,443

    If you keep wrestling with an Idea, have road...

    If you keep wrestling with an Idea, have road tyres (legal) and play tyres, (37's on a 17 inch rim) modify the guards properly to fit the play tyre and shave the Diff.
    Diff shaving can give an inch...
  12. Replies
    17
    Views
    1,443

    Plenty of folk do put bigger tyres on, often...

    Plenty of folk do put bigger tyres on, often combined with illegal lifts, but the insurance companies know that. If you get unlucky & have an accident you can bet that tyre size (& lift height) will...
  13. Replies
    8
    Views
    662

    I have just changed from 15s to 16s. The 16s give...

    I have just changed from 15s to 16s. The 16s give you more choice in tyres and are becoming more popular than the 15s. The main reason I went 16s is because I have gone with 35 inch tyres, so having...
  14. Replies
    44
    Views
    3,340

    You have sorted the box install and hook up to...

    You have sorted the box install and hook up to comp housing, well done and looks good mate.
  15. Replies
    44
    Views
    3,340

    Well I reckon you have worked your was thru a...

    Well I reckon you have worked your was thru a raft of problems and beaten them, one way or the other! Well done. Regards the outer guard, sit, think it thru and see how you can make it work - it...
  16. Strange how you say Phil that copper is better...

    Strange how you say Phil that copper is better than alloy for heat transfer. I reckon I have spoken to about six different radiator places and all of them said alloy was better for heat dissipation....
  17. Here is the engineering and the total myth...

    Here is the engineering and the total myth busted. The thermal conductivity of copper is 1.9 times that of aluminium. So if you have the same area of core with the same number of fins and the same...
  18. Replies
    4
    Views
    413

    Selleys has this product -...

    Selleys has this product - http://www.selleys.com.au/sealants/silicone-and-other-sealants/remover/
  19. Replies
    2
    Views
    792

    From the inside you really just need to Push out....

    From the inside you really just need to Push out. start in a corner and lift the rubber seal and start working around. You can keep the window closed, makes no difference. you will have it out in...
  20. Replies
    24
    Views
    2,272

    Its Caster not Camber mate. Caster bushes are...

    Its Caster not Camber mate. Caster bushes are rubbish. Drop boxes are way better for caster correction than bushes. You will also need a drag link and brake lines for a 3" lift.
Results 1 to 20 of 20