OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

Search:

Type: Posts; User: Bidja

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds; generated 25 minute(s) ago.

  1. IMO water temp and do a oil pressure gauge. Of...

    IMO water temp and do a oil pressure gauge. Of course EGT and boost gauges. I have a scan tool via OBD11 port and can look at many (like my load and N-m visual). For me AFR would be an...
  2. Button pressed, EFT $20 your way @AB. Recon...

    Button pressed, EFT $20 your way @AB. Recon generate more interest here than from my bank account.
  3. Sent you PM Craig.

    Sent you PM Craig.
  4. Weld on crank should be fine. Recon get an...

    Weld on crank should be fine.

    Recon get an other opinion to compare. The company that I googled appear to do a range of application methods and varied product range (just a thought).
    ...
  5. Put my glasses back on but pic remains blurry. ...

    Put my glasses back on but pic remains blurry.

    With the damaged shoulder (clamping face), alternative maybe to consider getting shoulder machined(ground) back to clean face and use thicker or...
  6. Yes Phil metal facing / deposition application to...

    Yes Phil metal facing / deposition application to gain improved wear characteristics (ie: thermal/mechanical), for new component manufacture, build up of worn and or damaged surfaces and has been an...
  7. Changing crystalline structure of the crank would...

    Changing crystalline structure of the crank would be my concern. Have a look at stellite 6 hardfacing/welding to build up the flat _ check this company out for starters.
    ...
  8. Boil a billy, take that head off and start to...

    Boil a billy, take that head off and start to have a good look around (safest option).
  9. Replies
    3
    Views
    111

    Welcome mate.

    Welcome mate.
  10. Replies
    6
    Views
    147

    Glow Plugs removal/test Not yet done for CRD. ...

    Glow Plugs removal/test
    Not yet done for CRD. Understand_disconnect battery(precaution), remove TMIC (if fitted), remove glow plug electric connection buzz bar and unscrew the seals.
    Use long...
  11. Replies
    6
    Views
    147

    Certainly do MAF and change out filters. Sounds...

    Certainly do MAF and change out filters. Sounds like glow plugs may even be injectors. Mine(CRD) done 160000ks still starts fine and runs clean.

    With the deeper drone noise, this can occur if...
  12. Replies
    13,912
    Views
    1,096,956

    Sticky: 10G all it needed was a grease nipple...lol

    10G all it needed was a grease nipple...lol
  13. Replies
    463
    Views
    92,134

    MB was this the Gumboot testing site? Looks a...

    MB was this the Gumboot testing site?

    Looks a winner with the kids lining up for the slide, Well done mate.
  14. Replies
    27
    Views
    607

    Just putting up options for consideration mudski ...

    Just putting up options for consideration mudski .

    Would only consider concrete poor for lower slab only if it was way out of level to obtain a good datum to come up from. Yeah preference...
  15. Replies
    27
    Views
    607

    Expansion joint in the form of inserting...

    Expansion joint in the form of inserting expansion foam along length of vertical faces of the existing tiled slab and the new pour.
  16. Replies
    12,553
    Views
    1,059,475

    Sticky: Sad situation, dogs (working or not) just have to...

    Sad situation, dogs (working or not) just have to be under control not roaming. Couple of dogs next door causing havoc, one herding and second does the hit (not good). Have Kelpies and always aware...
  17. Replies
    27
    Views
    607

    Hence the reason for an expansion joint, being...

    Hence the reason for an expansion joint, being between the two different sectional thicknesses ((eg: low slab(1st section) to tile area (2nd section)). If tiled area was stable, would seriously...
  18. Replies
    27
    Views
    607

    mudski to bring your low slab up and level to...

    mudski to bring your low slab up and level to obtain common datum throughout maybe ARDEX K 900 BF could help mate (Ideal for levelling up to 90mm thick). Need expansion joint and recon use a...
  19. Not a good idea to mix oils. Just replaced...

    Not a good idea to mix oils. Just replaced clutch and changed manual gearbox & transfer oils, used as recommended by Penrite_Pro Gear 75W-85 Full Syn.

    Weep should be fine, you were working it...
  20. Replies
    27
    Views
    607

    I prefer to fix T&G 19mm flooring to timber...

    I prefer to fix T&G 19mm flooring to timber battens or joist spaced at 450mm centers. Another method for laying timber flooring over your existing tiles is to use ply sheeting. The sheeting is laid...
  21. I had some hesitation going a SMF, as read...

    I had some hesitation going a SMF, as read reports of shudder low down and generally a bit noisier in drive train.

    Must say, I am so pleased with the function/performance of the new 4 Terrain...
  22. Not off the hoist yet. Bolt set delivered and...

    Not off the hoist yet. Bolt set delivered and ready to go, G/Box and dual mass flywheel out and on floor, stunk heaps, serious hot spot on pressure plate, clutch plate right down near to metal and...
  23. For some reason bolt kit missed Toll pick up last...

    For some reason bolt kit missed Toll pick up last night, now all good have a consignment # and seen that is in transit (air). Gave me a chance to amend delivery address to hold at depot, so first up...
  24. New 4 Terrain ER2 clutch and SM flywheel...

    New 4 Terrain ER2 clutch and SM flywheel delivered today but missing flywheel to crank bolt set. Contacted OEM / supplier (CI Aust) good bloke, told him install is scheduled for Wednesday, first he...
  25. Thread: General banter

    by Bidja
    Replies
    26,119
    Views
    3,264,421

    Changed mine first time since new @ approx...

    Changed mine first time since new @ approx 120000ks and replaced with genuine still quiet after another 40000ks. Kept original yet to rebuild as spare.
Results 1 to 25 of 498
Page 1 of 20 1 2 3 4