Search:

The 2.8s use a gearbox out of a 350z. (Smaller box). The 3ltrs are the same box as 4.2s but have a dual mass flywheel instead. Also slightly different diff ratio, but nothing a set of 33s or 35s...

Ok my curiosity got the better of me, so I installed it and guess what...... No fried ECU!!! The wire that I had was correct. (I did check it all with power probe before hook up. But you never know...

So no one has attempted to install this in a Di motor???

Hey mate,

I have an ASE intercooler on the wagon, and it came with a underslung fan. The relay that this fan was driven by is hooked up to ignition with a switch so I can turn fan on and off... It...

Hi,

Its been a while since I'be been active-ish on the forum (Moved interstate twice) - Hope everyone is doing well... I wanted to know if any fellow 3ltr Di dudes have managed to wire up the No...

Just for the record.... Found problem. It had to do with intercooler thermo fan. A dodgy relay caused it to backfeed a signal up the ignition line... yeah I know it's weird, but I worked out that if...

*Cant pin point* (can't edit post in tapatalk)

Oil is delo400
86degrees as always been on ecutalk
Still cooling down below 200 degrees betore shutdown...

Nothing has changed out of usual. Sometimes it does it, sometimes it doesn't. Can pin...

Hi,

Just a quick question... Does the ZD30 (02 series 3) have a fuel cut off solenoid to stop run on after turning the key off?

I am aware the other diesels do but haven't been able to figure...

What scotty said. For most brake controllers, wiring it up is easy. 1 wire to ground, 1 wire down to trailer plug, 1 wire off the brake peddle (use a test light to see which one is the switched wire....

Same! Just the $2 fuel super cheap things. Seemed to work alright too

I've had autometer gauges in mine and installed quite a few of these autron gauges in other vehicles... At first, I was thinking of swapping to autron and freeing up a spot for a dual batt gauge they...

Hey Mate,

I have ordered an ASE cooler for mine too. Should be here this week so I'll let you know how she goes when its in.

Cheers

Hey mate,

I'd be doing basically what everyone else has suggested. White/Blue smoke aint a good sign. Hopefully its just blow by being burnt up. Does he have an EGT gauge? I would hope so with 3in...

Yeah I knew what you meant. I was just havin a bit of fun with some ambitious thinking of a zd30 that has done 800 thou kms. Its all good. Hope mine does that many before she packs it in. And welcome...

I read "800k" & "ZD30" in the title and thought, Damn! At last we have a long life 3 litre..... oh well.

Mine usually takes about 5000kms to start the blackishness. - egr blocked but! before it...

Cant believe I missed this thread... Love takin storm pics, but can't seem to find anything that Ive takin that stands out from the crowd.

The big lighting bolt was looking out from our balcony in...

You need to wire your turbo timer to keep the acc position active as well. This will stop sub tank communication errors with the ecu, which causes the issues you are having. Sub tank is powered on...

Hey thanks fellas, great tips.

Ended up getting someone else to do it as it was only an extra $300-400. Not worth my hassles as I currently don't have the space nor time to deal with it. Would...

Sorry, can't recommend anyone, but just some advice - you will need a boost gauge already installed to do this mod. Also recommend the pyro too. I'd be happy to help, but Im on the sunshine coast,...

Just a little report / feedback for those who have a dual mass flywheel that needs attention, and don't know whether to convert it to single, or go with another expensive dual mass. Here is what I...

Mine has always done this. - 02 Series 3 ZD. Never worried about it. Never need to use 1st gear until you come to a complete stop anyway....

Saw this on the news up here (sunny coast) a few nights ago.

We get a lot of adds about not attempting to cross flood waters here, then to see this on the news, it's a wonder why they don't have a...

Yeah that's the part I'm worried about. Doing all the modifications and altering the standard piping to suit, only to find nothing has been achieved. - or worse off, and then not being able to put...

Ok. Not really chasing power, just trying to lower them egts. Need to tow a 16x8 fully enclosed trailer interstate, so a little worried about any hill climbs. I have the pipe work and random pieces...