83433
I really should be spending this money on my ute but the temptation was too great. :wink::wink:
Type: Posts; User: Sherro
83433
I really should be spending this money on my ute but the temptation was too great. :wink::wink:
threedogs Nothing noticeable mate and thanks for the tip.
G'day Bluedog77 I have been running the MT51's 305/70R16 they are not too noisy and handle ok but i'm no weekend racer either. I did a central Australia trip Brisbane, Camron Cnr, Gammon Ranges,...
According to the manual 0.468+-0.02 mm. Hope that helps.
The Stedi head lights are awesome on low beam and high beam and two Stedi 22" St4K light bars are very good as well i just nip up all the allen key bolts on them and never had any moisture in them...
That's the bolt spacing on the bottom of the radius arm for the sway bar mount the 'H' bracket bolts to their radius arm then the sway bar mount bolts to the 'H' bracket.
I've got a bit of a soft spot for Stanage.
80160
The Breakaways near Coober Pedy I was fairly happy with how it turned out.
79533
2. Boggy Water Hole Fink Gorge.
79488
Boggy Water Hole Finke Gorge.
79487
Have a read of this it's not patrol but it's very similar.I would recommend fitting a boost and EGT gauges before touching the pump so you don't kill an engine....
Have a read of this might be helpful.
https://www.patrol4x4.com/threads/gq-rd28-variable-geometry-vnt-turbo-upgrade-and-front-mount-intercooler.406027/
I'm running these from Stedi awesome light out put on hi and low beam.
https://www.stedi.com.au/stedi-7-inch-led-headlight.html
77466
Janowen Hills
77465
Fraser Island
77464
It's an easy job on a GQ you don't even have to remove the seats just the scuff pads and kick panels each side so you lift the floor mat to get to the bolts and remove the grill as well.
Gave what i could best of luck AB great mob here to get you going again.
You could try this mob on eBay. http://stores.ebay.com.au/air-on-board/LED-Laser-Etched-Series-/_i.html?_fsub=599636019&_sid=292736109&_trksid=p4634.c0.m322
For heat retention, i've run a turbo sock on the last two turbo's to try and keep the heat down on the surrounding hoses and help keep engine bay temps down plus i'm not sure i can find a sock that...
Now wait on Richie at Radius Fab to knock me up a new manifold with a t25 flange.
This arrived the other day.
68895
68896
68897
68898
68899
EFR6758
Added a lift pump and filter goes better now the injector pump doesn't runout of fuel any more.
6889368894
The big Xgt Lightforce spotties are off and two Stedi light bars are on, the bottom one is their 120 watt ultimate driving light and the top one is the 240 watt hyper spot both are around the 22...
Things have been a bit slow in the build department, payed a visit to Superior Engineering a few months ago and walked out with a set of these. They made a bit of difference to travel think i need...
It can be done just be ready to shut it down if the flow stops the oil pumps are steel on alloy so it won't take much to destroy one if it runs dry.