Search:

Hey WHITEGQ, I still have the Auto Diff in mine too its not bad I dont think I'll change it. Mines on Dual Fuel too and have noticed better economy with both, I took it up to a mates farm on Saturday...

Hi guys,
Well my Auto finally Died and I looked around for the Best Price, I considered doing it myself as I have done a few Fords & Holdens in my time but the weight of the Box kinda deteered me...

I will definately be buying one for mine, thanx ;P

Hi Guys,
Thanks for all the input. I checked the oil and it was very dirty but didn't smell too bad, I picked up a Filter & Pan Gasket and installed them. It took about 6.5 Litres to fill, which is...

Hi Guys,
My GQ is shuttering after it changes into Top Gear at about 95km, any suggestions on what may be the cause and remedy for this please.:bowdown:

Cheers Wayne.

Fired it up today and took a couple of Pics to wet the lips.:thumbup:

Thought bout that, I just take the Geny with us, lol

LOL, More pics:

Hey Guys,
Just finished building my Spit & thought I'd share the pics. The Legs are 20x20 RHS, Base is 3mm Mild Steel, Lid is Stainless. The Shaft & Motor I got from a mate who picked up a few...

Hey, I just got out the Drawing I started with which should help you out enough to get started, the measurement at the front should be 150mm not 100mm as stated otherwise All Good.

I made up the Brackets today for the Hi Lift Jack.
I have made them from 6mm & 3mm Flat Bar, 12mm Bolts & Nuts. The Longer one Holds the Foot & the other one Holds the Main Shaft further up the...

Very Nice job!!! I will definately be putting one on my GQ.
Thanks.

was quite easy mate, frame was made from 19mm RHS and Mesh was 50x50x2.5
Top Bar was 1200x2050
Bottom Bar was 1200x2200
x6 Spacer Plates were 100x200 with a 10mm fold included (Turn 2 sideways for...

Hi Guys
I have just finished building my new roof rack, I still have to weld in a few holders for the Jack, shovel, splitter & lights but its all together.
Cost me about $30 in steel & Mesh, I...

Thanks XLR8,
I will take a look at the links and do a search.
Hoping someone makes it easier for me & has the plans, otherwise might go with my previous plan of mounting the winch first and...

LOL, I've designed a Cradle for it to be mounted betrween the chssis, behind the original Alloy Bullbar but will require me moving the Bar forward a little to make adequate room for it to fit, just...

Hi Guys,
I am considering building my own Winch capable Bull Bar for my GQ, I have access to all the equipment to fabricate but was wondering if anyone had built one and happend to have plans for it...

Thanks Guys, it's a Great Site.
I look forward to contributing to the site and making new friends.

Hi,
Im from Pakenham, Victoria. I love the outdoors and enjoy working on my GQ.

Cheers, Wayne.

Hi Guys,
Pakenham, Vic for me thanks.