Search:

Sorry for resurrecting old post, but what do you mean by overflow setup, I'm at that point now. Thanks

Hi all, is there nobody with a Patrol gq st 1991 speedo lying around that could just take a photo of the back of the circuit board (especially a close-up of top left corner. I've got some copper...

Thanks GQ Tank, I managed to get a 4mhz one from RS components. Think it might be close enough. Problem is that the copper track also came of on the pc board of the speedo where the resonator was in....

Will definitely do so once finished. I posted on my other thread another request. I'm very furstrated with the Speedo at the moment. Cheers

Hi all, some feedback and another request please I have found where the resonator came of an, but when I Wanted to solder the new one in, I noticed that the old one didn't just broke off, but that...

I apologize for the delay in posting a result here. I got 4mhz resonator from RS on Friday. Will put it in this weekend and will post the results. Cheers

Thanks guys, will use the photos posted on my other thread by Mudnut, look at the markings on the pcb and look for the remainder metal stubs left after the break off. Should be good with all the...

Thank you very much Mudnut. This will help me heeps. I will Compare my pcb with the photos. I Could also get some writing on it - 4.19 mz so will look on the pcb where that is marked. I have posted...

I can make out some writing: 4.19 mz. If that is the case, it might be the crystal. But I still don't know where it would go on the pcb. Photos would really help a lot of people on this forum. Cheers

Sorry here is the photos going with first post :D

Hi guys,

I have had the Intermittent problem with speedo on my Patrol gq 1991 for a while now, but I think I have found the cause now. i've done the soldering, extra ground, clean contacts,...

Hi guys, still have the Intermittent problem, but I think I have the cause now. I took out the instrument cluster again, and noticed something loose inside. On opening it was a capacitor thing in a...

Hi all, I've done everything that is expected to do to make the manual download accessible. I've managed to download the manuals on this forum and is very appreciative of that. It has helped me a...

Will have a look at the harness thanks. Will also follow the wires from sensor to cluster and clean all plugs and connectors. I also thought it might be a spike pushing the needle beyond the upright...

Hi all, hope all is well in Patrol world. I've done all soldering and cleaning contacts on the instrument cluster of my Patrol gq. The only instrument acting up is the speedo. When the car is...

Thanks MudNut, will do with the manual sub. So far so good after soldering the dry joints on the instrument panel. Will keep an eye on it. Cheers

Do you know where I can get the Rb30 manual supliment. I have the manual but can't find the engine supliment anywhere. It would really be apreciated if I could be steered in the right direction....

Thanks for the link. Will test tomorrow. Did some dry joint soldering. Hope it's better now. :)

Hi thanks MudNut thanks you guys don't waste time helping others. What a great forum. Mine is a RB30S 1991. No need to pull apart at this stage as I managed to figure it fit (with it's grooves) in...

Thanks Mudrunner will give him time to respond, if not I will do as you suggested. Cheers Mate

Hi, it is this picture taken against stepper motor plug for size Thanks Mudrunner for response.

I took my GQ instrument panel apart to solder dry joints. In the process I didn't notice where the aluminium square tube with funny cut and shape goes. It is about 40mm long by 12mm by 10mm. Would be...

Welcome from a cloudy/rainy Melbourne Victoria

Welcome to the forum, hope to learn heaps from your experience

Welcome from a cloudy Melbourne Victoria