getting someone else to do it is definately cheating, lol but if the quality was there cant argue
Type: Posts; User: thomas.h
getting someone else to do it is definately cheating, lol but if the quality was there cant argue
if you shim lock the rear lsd it makes it really obvious when turning tight at low speeds because your tyre chirps due to over rotation, auto lockers like the goanna systems aare better because they...
what colour smoke narrow it down white smoke unburnt fuel black smoke partly burnt fuel blue smoke oil go from there with cause and effect if its white it means its running too rich and probably a...
its probably from the pressure relief valve within the filter housing itself best thing to do is if its the external oil pump/ filter housing is to remove it and get it checked at your local reco...
most likely going to be backlash in the uni joints, easiest way to check is lay under the car grab hld of the driveshaft on either side of teh uni and twist in opposite driections if you feel any...
when i got mine registered they are legal to seat 4 in qld so the rear seat can be used with the booster seats with no problems they come with factory fitted seatbelts in the seat and aftermarket...
new to forum have been in love with mq for 3 years now, in that time has gone from a sad little machine sitting into a paddock to a veritable off road weapon. included in this time has been many a...
i bought lights opff ebay for mine and had no issues at all all wiring looms matched up and if your really having that much of an issue cut off your old plugs and solder them on to the new lights
simple check your seal on the pistons in the calipers and check that both are actually working remove both calipers stick a block of timber about the width of the disc in your caliper without pads...
the smaller you go the better the backpressure and the more torque you produce too much back pressure and everything goes downhill though to give u an idea im running a extracted 2.5 inch single...
you can improve all those torque figures by installing a v8 :P
have the same issue but mainly confined to my body mount locations will be welding in a thicker plate to strengthen when i fix mine to give a bit more strength for body blocks
could really use this