Search:

I know it can be done for strait gas but I am asking for duel fuel and if its viable

Has anyone fitted a turbo to a tb42 with a carbie and still have it on gas and petrol?
Can it be done effectively and what results will it get?

When I checked about it via a 4x4 shop they said it was ok because we are not modifying the chassis that it is ok, in Vic anyway.
I put caster bushes in a few years back because I thought the drop...

Thanks Darren. have you had clearance issues like it states in the description? What brand would you recommend as these is a few now on the market. Ross

Hi Guys,

I want to ask which is the best way to go.
I have a 3 inch lift with EFS poly caster correction bushes fitted. The front 2 bushes have worn and need replacing. I bought the arm spacers...

Check in my DIY thread for placement of the camera. I put a replacement mirror in my ute and hard wired it

To adjust the konis you need to remove them.
Then there 2 little holes at the top where you push a rod through to remove the rubber bump stop.
Then compress the shock until it stops.
Turn the...

I bought a bottle of water and used the the cap from the pop top.

nothing in the 4x4 but used to get pulled over nearly every weekend in a yellow escort panelvan 1.3ltr. Once the cop asked if I have any guns, drugs or dinamite in the car. WTF. It did 110kms/hr down...

Good job. Would be good to see the finish product on the car

I have asked the seller if I can view it but have had no reply

Yes I think there is some dodgy stuff going on with the ARB dealer that removed it from my car.

There are 4 holes in the drivers side wing that were there when I got the car and the holes are still there that I drilled to fit a front rack. there are also 2 holes on the light mounts for...

There is a bull bar on ebay that has been in a head on accident.
This bar was on my GQ and was replaced by the insurance company and was to be destroyed.
It is not a ARB bar and steps as advertised...

There is a bull bar on ebay that has been in a head on accident.
This bar was on my GQ and was replaced by the insurance company and was to be destroyed.
It is not a ARB bar and steps as advertised...

There is a bull bar on ebay that has been in a head on accident.
This bar was on my GQ and was replaced by the insurance company and was to be destroyed.
It is not a ARB bar and steps as advertised...

There is a bull bar on ebay that has been in a head on accident.
This bar was on my GQ and was replaced by the insurance company and was to be destroyed.
It is not a ARB bar and steps as advertised...

welcome to the Patrol blood

Welcome aboard

Good on you Darren. Always good to have some great help helping out.
Also Growler.

are these the ones that the dizzy has to be removed for the machining?

GQ's look good in any colour.

Just a tip for you for cutting sheets straight.
You can clamp the box tube got for the runners to the sheet at the set back of the saw and run the saw along the edge of the tube to get the cut...

Hello and welcome

You dont need the tyre to bag out, they grow longer when running low. I usually go to 18 on a day out and 16 if slippery on my 17's and this makes a big difference.