OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

Search:

Type: Posts; User: ImRobboToo

Page 1 of 4 1 2 3 4

Search: Search took 0.00 seconds.

  1. Replies
    1
    Views
    439

    1998 GQ diff the same as .......

    .......... a 2002 GU.
    Would I be able to fit, a 4wd System Lokka Locker from a 2002 GU into the diff of a 1998 GQ ???

    Cheers
  2. Alls well that ends well. Glad the Mechanic was a...

    Alls well that ends well. Glad the Mechanic was a boiler maker in a previous life Patched it up stronger than it was, and I'm now 6 hrs down the road. Another 8 hrs tomorrow and will be home....
  3. Ok cool. We are putting the Mig on it now and...

    Ok cool. We are putting the Mig on it now and seems to be holding so hopefully we won't need to block it.


    Tapping it out . . .
  4. No mate. It's the pipe going across the back of...

    No mate. It's the pipe going across the back of the engine block to the Egr . . . . We found we can MIG it up for now. If that fails, can I block it from the Manifold ?
  5. Erg cross over pipe Blown and have Egr blocked . . . Can I .......

    Block the Egr on the manifold side. ?? I'm stuck in the Outback WA At the moment and wanting to know so io can continue home. End of Holidays and meant to be home Sunday.

    Any help ASAP would be...
  6. Replies
    138
    Views
    108,342

    Sticky: I'm in the Great Southern ~ More so Katanning ....

    I'm in the Great Southern ~ More so Katanning . . ... . . . . .
  7. Something to keep a eye on. I got the 55w HID so...

    Something to keep a eye on. I got the 55w HID so hopefully they aren't too much heat for the 170 Strikers
  8. Good Diesel Tuner . . Southern Western Australia

    I'm quite a distance from Perth, and I don't know when I will get up there next. (someone did mention a place in Perth, but I can't seem to find it now. Drop Perth in as well, just incase I need to...
  9. Well, I'm just about done. COMPLETED: 2"...

    Well, I'm just about done.

    COMPLETED:

    2" Ironman Lift
    Tough Dog RTC Steering Dampner
    285 75 r16 Cooper S/T Maxx
    Dual Redarc Battery System
    Boost and EGR Gauge
    3" Exhaust
  10. Thanks all Finally got it sorted. I followed your...

    Thanks all Finally got it sorted. I followed your diagram Mudski just not knowing part names and where things are makes it a little hard.

    Now I have it set up with new Intercooler :) it maxes out...
  11. I suppose I should be asking, where the Vacuum...

    I suppose I should be asking, where the Vacuum Pump is . . .
  12. Ok see, I'm confusing myself. Forget the post...

    Ok see, I'm confusing myself.

    Forget the post above, as I see the drawn image doesn't have the needle valve. See the confusion :(

    Anyway, I see I need to completely block the Vacuum Filter
    ...
  13. Regarding dawes/needle and port blocking . . .

    Ok, I have looked around, but still have a question or 2.

    I'm wanting to know about the blocking

    I see in this diagram, the Blocking is from the Air Resonator Filter to 'C' port which is the...
  14. She is like a fridge inside after a few minutes...

    She is like a fridge inside after a few minutes of Air Conditioning. Gotta have dark tint ;)


    Tapping it out . . .
  15. Got new rubber yesterday being Coopers S/T Maxx...

    Got new rubber yesterday being Coopers S/T Maxx 285 75 R16

    Washed and detailed. Look shmick being white :)

    http://www.nissanpatrol.com.au/forums/images/imported/2015/10/209.jpg


    Tapping it...
  16. I have been busy over the last week, not...

    I have been busy over the last week, not including the issue I have had, with error codes.

    2" Ironman Lift with a ToughDog RTC Steering Dampener done ✓

    61939

    Boost And EGT Gauge installed,...
  17. Well, all said and done, I got the GU on a real...

    Well, all said and done, I got the GU on a real computer, and we had a few error codes, clearing them all, including the Cam Level Sensor.
    After the test drive, 1 kept coming up and that was the...
  18. null an void

    null an void
  19. Well that was a Homer moment. I was so focused on...

    Well that was a Homer moment. I was so focused on Nissan Acronyms.
    Thanks for clearing it up 4b4

    You reckon it could be the crank sensor being the issue?


    Tapping it out . . .
  20. Well, I just had local Toyota bloke up here with...

    Well, I just had local Toyota bloke up here with his Computer, and initially, it came up with 4 error codes. He then cleared them, and came up with a resulting 2. The main one he said will need...
  21. You need to speak to me as if I know nothing....

    You need to speak to me as if I know nothing. Sorry mate but plunger ?? OOI ???

    Between NATS, NADS, MAF, OOI these acronyms all have new meanings to me :(


    Tapping it out . . .
  22. Ok no go it still just turns over and that's it. ...

    Ok no go it still just turns over and that's it.
    Any other ideas ??


    Tapping it out . . .
  23. Checked Earth and seems ok. I tried starting...

    Checked Earth and seems ok.

    I tried starting it and a couple of times, it started then the revs went sky high, and then it died again ??

    On that diagram which is the ECM relay ?? In that other...
  24. Good read that other thread. Thanks. Pity the...

    Good read that other thread. Thanks. Pity the closest dealer is 100kmls away, or I would buy one this morning.



    Have done mate. I did tap into the main Earth point in the foot well yesterday,...
  25. How do I reset the computer ?? will disconnecting...

    How do I reset the computer ?? will disconnecting the battery and all power trip it ??
Results 1 to 25 of 88
Page 1 of 4 1 2 3 4