Sorry but it was the vnt screw with lock nut not the rod from the actuator that I adjusted as the Nissan patrol reference document by Aksniss suggests, just need to know in mm how much of the screw...
Type: Posts; User: GU4PLAY
Sorry but it was the vnt screw with lock nut not the rod from the actuator that I adjusted as the Nissan patrol reference document by Aksniss suggests, just need to know in mm how much of the screw...
Hi guys does anyone know what could cause this to happen it's a 2006 zd30 ddti engine auto just doesn't want to go above 120kph any ideas ?? Running a hpd ic and 3" exhaust , boost gauge gets upto...
Intercooler is brand new no leaks the fault codes are showing -0702,0403,0905,1401,0703,0407 going to auto masters tomorrow to get a diagnosis done properly , hopefully not to bad as it only started...
Yeah it ran perfect before! And I have a boost gauge fitted which was all working upto the point of it playing up,Replaced maf and throttle position sensor had roadside assist come out but there scan...
Yeah mate I have a gauge ,3" exhaust aftermarket intercooler all was running good but flushed coolant and then started to overheat ended up being the viscous fan stuffed so I changed that and water...
Hey guys need help as I've got a zd30 not common rail 2006 patrol it's running rough idles low ,engine light comes on checked all hoses are good cleaned maf sensor has vacuum through hoses has anyone...
Doors still locking automatically , just got back from driving turned car off door open and it's tried to lock but this happens randomly , all interior lights still work as normal everything is...
Hey guys has anyone heard of the doors auto locking ?? I've got a 2006 patrol and while doing my water pump I noticed my doors locking even when open never done this before, seems to have started...
thanks for the info guys .nissan reckon it's a two day job ,i guess thats one way to rack the labour. While working for arb one of the guys spiked a wire in the main harness of a navara ,was only...
hi all has anyone done a rear main seal themselves on a zd30 auto if so how hard is it can't quite make it out from the manual . please help if you can :icon_bonk:
you could disconnect fuel line at fuel filter and pressurise your fuel tank till it starts coming out near the fuel filter. then reconnect and start bleeding out your injectors one at a time until...
thanks look forward to the map also i will be going in about a months time so hopefully a bit wetter
sounds like i should just save the money for a new ic instead
old man emu do some at least that way you know their made for 4wds i think their the poly urethane type
one word "Jealous" would of loved a 4.2 but over here their a bit too pricy but i can't complain my 3lt has taken me every where i want to go so far
spewin would love to go and meet and put a face to the names but misses just got out of hospital
hi guys thinking of going to lane poole reserve can any one tell me what the 4wd track is like
if you cant find any diagrams you could try to take heaps of photos from your phone as you pull it apart and just do the reverse when putting it back together. i'd like to know how you go because i...
good to see you've jumped to the dark side! the guys on this site are really helpful great bunch of people on here
did you solder the end of connector and do you have any joiners along the way
nah iv'e got the auto but i'll have to have a closer look on the weekend. thanks guys for all the info
nah my spotties are lightforce halogen so they come on full pelt just got to be careful its not the boys in blue haha
i used to work for ARB as an installer doing alot of suspensions first question what sort of bullbar steel or alloy ,winch? what sort of load are you thinking of carrying the last thing you want is...
i'll keep an eye out for how yours goes it would be good to know. And yes do alot of beach driving love my fishing and 4wding there's no better way to enjoy our beautiful country!!!
sorry for the rant i ment to say how come they don't seem to get booked for them but quick to pick on a 4by