Iknow these would be good with big lifts but would they help with a 4 inch lift? or not needed
cheers
Type: Posts; User: FullFlxd
Iknow these would be good with big lifts but would they help with a 4 inch lift? or not needed
cheers
I have heard that you can wipe the code with scangauge if you have one not sure if the Di version of the tool does the same thing?
I am keen on the Cross Country ones with a fan but liek the other post says funds are at critical levels. and I'd rather grab sliders before IC exchange.
One other question HOW TO STOP DEBRIS...
Rumcajs
Oil catch can on the way and will clean the intercooler out once can s installed. But that tiny breather hole in the air box is annoying, if I shouldn't block it what else can be done??? I...
I tried it on the old truck and didn't really notice a difference. However, wouldn't touch it in the new truck! Don't know what the consequences are and have heard they are advrse. Sorry can't help...
Cool I'll source the rest around home then.
hey guys was hoping to get some idea whether or not the provent kit is worth the $300??
The unit itself is $170 has any one bought the hoise and clamps seperatly? and how much did it come to?
the MAF in the troll is right after the air box not after where the breather connects to the pipe , thus has no oil or soot on it at all. I checked it earlier.
I didi notice something interesting...
yes it is, and im not taking it to Nissan any more services don't trust them! It just costs me money when they try to find what the problems are while telling me they don;t know
Cool I'll check that out
Does anyone have pics of where to block egr on the crd's? I had a look but couldn't figure it out. I think it throws codes but i was thinking partial block??
By the way...
Hey guys,
Yesterday I installed the exhaust on the 09 patrol. Whilst doing that I had to take the pipe off that goes from turbo to intercooler. I found a fair bit of oil in there. I remember...
Im running 33's on the troll and on full flex they are scrubbing the under side of the guard but miss mudflaps. Theres about 5mm between tyre and lip.
No way I could run 35's without lift
ran fine on the MK I wouldn't put it in the GU though. Have heard negative things about buggering up injectors. Don't know wether it's the case.
I bout the ST's a while back and was told that they are 40% on-road and 60% off-road. Had them on my MK and again on my GU. Haven't had any problems on sand or rock and they grip nicely on road. Have...
If you have a welder and know how to weld everything will fit whatever car you have!!!
it's like transplant surgery as long as bloods the same ahhah
how much of this manual will apply to CRD (2009) models? Is it worth downloading?
I agree with Macca86, When you find that sweet spot in the RPM range and drive within it whilst on the road it really pays of. I have being playing around with it for a while and now Im getting...
With the New car Im always so worried about F@#$king something up changing into 4 wheel drive was one of them. In the old MK I used to change from 4H to 4L whilst driving (mainly on the beach) Only...
That last was awsome. Still not as good as the patrol hill climb!! one were the shorty tips then starts to rol back down but the bloke guns it out of the roll, absolute accuracy on the go pedal
Yeh that fella in the car could used a hand, would have stopped hime locking the wheels
aahahh I use to push my old MK down the road when starter played up and jump start. Was a lot stronger back then
I wish I had seen the vid before
There was another vid where the guy was extremley stuck in a mud hole that they had to use three cars to drag him out!
I suppose the only other thing you could have done first is lift it out of the...
I can imagine, hopefully there is something the Troll can do in her state at the moment!!
Still raising funds for the lift
Unless my mates have a different Idea I think we're going from the Tank, I haven't being for a while so don't remember much. Love to check out the entire area on day
Couple of us are heading to the powerlines this sunday anyone keen to come????