Search:

hey mate i have these guages in autometer, oil pressure, water temp, pyro and boost, all with mounting cups and brackets, id be looking for $400 for all of them
let me know
tim
0432 361 819

I recently bought and installed a NPC 6x6 clutch in my gq td42 patrol, I have started wrecking the patrol now and im selling the motor and gearbox, to replace the gq I bought a tb48 gu, is it...

Can anybody help me id the turbo in the attached pictures

Sorry should have said, motor conversion was tb42 to td42

Hey
My power steering is now really heavy after motor conversion, if
I hold the revs up it gets easier, so I think that the power steering pump is ready to give up, where's the best place in...

Hey guys,
I'm missing the bolts for the starter motor and my td42,
Does anyone know the size (pitch, length and diameter)?

Thanks
Tim

yeh saw them thanks mate little bit concerned on their quality

this thing looks awsome

are they xr seats engineerable in NSW? any special ways to mount to pass engineering?

with roof sliders do you remove the gutter all together

Hey mate my tb42e used to get up too about 3/4 on the factory temp gauge when out 4wding, I replaced the fan Hub, thermostat and water pump for under $200 and it didn't get hot again

Thanks for the reply mate, the speedo is on the transfer with the 4wd switch, but neautral switch is probably what it is

More of a general interest question, I removed the gearbox from my tb42e and it has two electrical plugs on top, 1 will be for reverse lights, but what's the other?

I only went with the castrol because of its cf rating, not because of the price, is being cf rated important? I have read td42s are designed for this type of oil, and new ratings I oil have high...

Ok car was originally to tb42efi I removed the whole harness and replaced it with a dx td42 harness, I have the cluster from the car the motor came from which was st spec, the dx loom plugs into the...

Hey
Does anyone here run castrol magnatec 15 40 in there td42
Mine is a silver top with turbo glide setup and had 320000ks it uses abit I oil,
From what I've ready he castrol would be a good...

I seem to be missing a few plugs in the wiring loom, ie oil pressure sender, 4wd light plug on transfer that's all I can think of ATM but I. Sure there are more

Thankyou very much yendor I'll post a picture later

I'm currently install a td42 in my patrol, it is a ti an I'm using a st cluster but only a dx woring loom.
So my question is what warning lights are on a dx dash cluster?

i like this idea, would it help with a fmic for slow crawling situations too?

hey guys im chasing a td42 starter motor preferably pickup in sydney
Tim
0432 361 819

Thanks guy seems like a friendly place already

Hey people,
Suppose it time to introduce myself and my 4b.

Im Tim work as a sparky in sydney
My patrol is a 1994 TI factory tb42e currently getting a heart transplant
already has a few mods...

fair enough will do

Hey guys im in need of some help with my conversion, heres whats happening its abit of a bitsa but hopefully all comes together.
-Car was factory tb42e TI model
-Engine and complete wiring has been...