Sounds awesome! Welcome to this place :)
Type: Posts; User: pollenface
Sounds awesome! Welcome to this place :)
Dumbest sh1t I ever heard.
I'm talking about a generator that runs on petrol, I have a 1kva genny and a 20amp charger that I take for backup battery charging, the whole lot weighs about 12kg
I've always thought of mounting a small generator on the roof for times of high electrical loads to assist alternator.
which motor?
If it's like mine it will be next to the battery, in front of the intercooler, behind the radiator fan. The pump is on the timing cover.
what help do you need?
It can run like crap without an error code, I've done it when I forgot to tighten an intake clamp.
there are two blanking plates available. you can blank at both ends to reduce intake/exhaust...
did this on mine when I first got it, I think it was a brown wire for the CRD
I just have a simple thing I screw on and it does the job, I just watch until the tyre looks baggy enough and then detach
I think it's a bit of hose and attachment that I cut off another dead 12v...
It's very satisfying when aftermarket things fit perfectly :D
I went OEM pads with slotted & dimpled rotors (original rotors were warped), they feel good but not amazing.
bought a spare 13mm square socket for the ZD30 oil canister loosening ratchet hole
I've been hearing a tinny rattling sound from the turbo area under boost for the last 3000kms and just cottoned on that it might be the turbo.
Hypothetically, which direction should I go if a...
workshop manual or owners manual? Follow the links on this forum.
I bought my own haynes workshop manual which is okay, but a lot of pictures relate to the DI motor with a little caption of how...
Welcome mate!
Do they let it roam?
Nice! Did you go genuine radiator? I'm thinking of adding a temp probe to the cold side of the radiator to monitor it's performance over time.
I hope to find out one day
I bought a black wolf one years back, the annoying thing was the width spec referred to the mattress being completely flat/deflated so when it was naturally inflated it was narrower than advertised....
Pics?
Welcome!
Knowing that oils are specified by manufacturers to meet EGR requirements (maintaining lubricity with added soot). If EGR is disabled/blanked, can one pick a non-specific engine oil that isn't ACEA...
You should be able to make your own wiring to the fan if you want to control it manually. I did this with a previous car, fan stayed on all the time.
I think put the new radiator in, then flush...
Did you end up addressing this? If not, apparently the genuine gasket is best, being of a softer material which seals better than aftermarket variants.
The injection tubes can be removed and...
Welcome!
patrol4x4.com is another wealth of info.
Welcome mate!
What's difficult about it?