Thanks for your replies
I rang Piranha and they recommend not to run the panel with that regulator as it maxes the reg out with a high potential of causing the unit to overheat.
Bit of a pain...
Type: Posts; User: hutchy84
Thanks for your replies
I rang Piranha and they recommend not to run the panel with that regulator as it maxes the reg out with a high potential of causing the unit to overheat.
Bit of a pain...
Morning Gents,
Just a quick one
I have a Piranha Smart Reg-8 and have been given a 100 watt solar panel, I was wondering if i can use that solar panel regulator with that solar panel as the...
Hey gubigfish,
The tune cost me $450 which included the supply of a boost controller, welding of the blow off valve and doing a pre dyno run then a tune whilst on the dyno - i gained massive gains...
I finally fit a 3 inch exaust to my patrol and put a K&N air filter in and went to United fuel Injection for a Tune to which they installed a manual boost controller and they welded the intake...
Hey Boke just a thought i used to run the original aluminium radiator and i filled it with mud one day out the bush and i thought i cleaned it all out but i obviously didn't do a good enough job and...
Hey guys regarding the removal and intstallation i will be building a frame and removing the centre console and lowing to the ground with a chain block
Regarding the cost for the 4terrain clutch...
Would anyone happen to have nissbits email address
Guys from any of your experience are the aftermarket rear main seals as good as genuine
Thanks to you replys fella's
I think im gonna go with the 4 terrain and i will get the flywheel machined and put a new rear main seal in aswell
I don't what the original flywheel is
I have a gu td42
I have heard a couple of reports that they aren't a good clutch and people have had them kark it straight away
Reading up on them they say...
Hey guys im going to be fitting a new Clutch
I can get a 4 Terrain clutch for $622 what are people thoughts on this clutch and has anyone on here got one and are they a good clutch
Any info...
Thanks guys had to jack up the car and do it whilst not running
Hey guys,
Does anybody know how to bleed a power steering pump on a 2011 ZD30 engine
Nice job mate What do you recon the overall weight would be
Yeah Its a good place i wouldnt mind getting over to the east one of these days they have some nice sites also
Just a pic i took the other day down white hills beach it was such a nice arvo
Hey mate you got any pics of what your doing be good to see
Hey guys
Was just wondering if anyone would no if the GU body specs that AB posted can be used on a 2011 GU Nissan patrol as it says there for 97 to 01 and since the GU im repairing is a 2011...
Hey all
Im a boilermaker / Welder by trade i can pretty much make anything you want when it comes to steel
But currently i work for monadelphous as a estimator mine site jobs which keeps me...
Hey guys
Was just wondering if anyone would no if the GU body specs that AB posted can be used on a 2011 GU Nissan patrol as it says there for 97 to 01 and since the GU im repairing is a 2011...
Eventually the bog will just fall out especially with a rack sitting on top.
Mate start of buy using rainex to treat the area of the damage try not to get this stuff on the rest of the paint work as it could stuff it up but in all honesty this will stop the rust in its tracks...
Tell him to sell it and buy a nissan lol
Here are the pics of the sacrificial chassis parts there only designed to take the impact so the main chassi dosent get damaged and the damaged ones worked quiet well.
I would love to put it on a trailer but my pop doesent have the money and since it wasnt insured it has been dumped on me and the old boy agh
Having fun doing it though