Deffinatly not a fun job!
Type: Posts; User: critta11
Deffinatly not a fun job!
Big chain supermarkets only use the fuel discounts to get you buying at there supermarket, they don't care about the fuel money, the big money is in the groceries!!! you buy there so you get $$ off...
Yeh heaps less restrictive especially if your running a 3" exhaust
Have you got a hi-flow snorkel?
Is yours chiped? Would that change when limp mode comes in?
West coast vico
How are you getting 19psi whiteout hitting limp mode every hill? Mines at 15 and even then hits it every now and then up a hill holding 3000rpm
So I was loosing boost a little while Ago in my zd30,and found that the engine cover had worn holes all along the fins on my factory intercooler. I highly recommend taking off the cover so that this...
You'd need a step ladder to get into the second one!!
Nice fold out table mate, keen to copy that!
Here's a picture of my engine bay, just an idea of where things are 40776
I have a smaller catch can off ebay that was $100ish and works great and fits pefectly next to the secondary battery. Line in is wet with oil, line out is totally dry. Has a cleanable filter aswell....
Yeh I did mean CAT haha my bad
The car could have collapsed causing back pressure and stuffing everything up.
I maybe getting a steely soon if you still needed one when I get that?
What's it doing when you "overboost" ?
Not sure it would be a good Idea to have the car running with the maf seņor out. Also you can test the maf with a multimeter. Youl have to double check the numbers but from left to right the wires...
I do wonder why my maf sensor just crapped itself one day, maybe had too much gunk on it and couldn't cope or maybe just burnt itself out?
It may be that but the butterfly valve that cuts off the intake when the engine it turned off makes a suction/click noise and you can see it happen at the back of the block under the intercooler....
They could but I haven't heard of that. If you don't have a catch can you'll be surprised with the amount of oil and gunk on them even when they look clean. Use CO contact cleaner that leaves no...
If your living on dirt roads as I do or do a lot of off-road driving it's recommended to clean the maff every service. It's a very easy thing to do and only takes 5mins.
On the intake about 300mm from the air box. Easy to see.
King springs now have a lifetime warranty
If you clean the maf sensor regularly it'll make a difference, deffinatly worth checking it with the multimeter to see if it's working correctly. Mine had done 180,000km before I luckly only busted...
Nah not yet, $$ is the issue haha after not knowing about the grenade issues until about a month and a half ago I've put prettmuch all I had into it. But Atleast I know it's all good now!! Intake...
I got max 600km out of my 3.0 gu3 with 285 75. Then I did all the nads, new maf sensor and put a 3" exhaust and I've hit 650km and the light hasn't gone on yet, close though. 80L tank
Also I get...