I spoke to a client of mine who used to own tjm here and he said a tjm store should be able to give me a pdf file that i can take to a printers to have printed out. So hopefully that works out
...
Type: Posts; User: mjr350
I spoke to a client of mine who used to own tjm here and he said a tjm store should be able to give me a pdf file that i can take to a printers to have printed out. So hopefully that works out
...
Hi guys.
I have just received a genuine snorkel with part number 011MB00213J which is meant to be for a Y61 2.8 Diesel and 4.2 diesel and also is supposedly made by Airtec and sold through TJM....
Yea that's been on the cards for a while. Maf probably needs a good clean. Do you know if they have an air intake temp sensor or is that possibly integrated into the maf. My old LS1 had it tapped...
It's EFI petrol. Where's the auto choke. Is that the gear hanging off the thottlebody.
Sent from my SM-G930F using Tapatalk
Hi guys. Ive noticed over the past few months that i get a slight hesitation at almost the exact same place within a few hundreds meters every morning around 4 minutes into the drive.
So I'll drive...
Im sure they can be rebuilt. Pull it apart and see if its full of mud etc. Its already broke so you cant broke it more
Sent from my SM-G930F using Tapatalk
Sorry. Should have mentioned that I don't have any software yet
Sent from my SM-G930F using Tapatalk
I know this is an old thread but what's the chances someone has the software for the newish tx3500s? Would the earlier tx3500 software work?
I'm picking one up tomorrow as my old uniden packed it in...
Be careful putting a switch on the dash. If you do, don't label it as "rear lights" because your not supposed to be able to project white light our the rear end while driving forward. I made the...
I run mine through the big grommet on the passenger side of the firewall. Just made a slit and poked through
Sent from my SM-G930F using Tapatalk
That's what I used previously. Had a look and it is GL 4 but somehow caused the cold second shift issue. Filled with penrite pro gear 75w 85 with nulon G70 additive and its a lot smoother but the...
That's the best news yet
I'm hoping that's the case. Might have to adjust my search to find more. I'm going to drop the oil today because apparently I used GL 5 instead of GL 4 and have cold second...
Hi Guys
I'm getting more and more worried about towing in 5th gear after reading and hearing about the weak splines in the early GU boxes. I have a mid 2000 tb45 patrol and have towed my loaded 4m...
Edit
Ive just powered the uhf from a totally external battery and there's still engine noise as I rev the engine up.
Hi guys. Quick question. Ive now got engine noise through my UHF after fitting a new dizzy cap and rotor button. There's no noise through any other equipment like am/fm radio.
Uhf is powered through...
Yea leave the dual systems for the V engines so that the seperate banks can bark separately.
It'd be friendlier on your pocket because you'd only be purchasing one length of pipe.
Ive done a bit of gold panning and sluice boxing around hill end and tuena. Also gave a Garrett ATGold detector but only managed to find old bullets so far.
Its great fun but hard work if you get...
What's the chances that wagon sidesteps would fit?
Ive got it.
2 SPDT relays is all you need to keep the accessories on until you open a door.
So easy to build so I gave it a go and it tests fine so should work well. Latches closed when the...
I run 15amp cable from my aux battery to the rear for my fridge. Never had any issues.
I've been thinking about this for a while. My old VY commodore had the option of accessories off with either key off or door opened so I got used to everything still powered until I opened the door....
OzTent RV5 so the missus doesn't have to deal with the copious amount of room in the double swag.
Been filling for years. You can buy an adaptor on ebay.
Put empties in freezer over night, invert 9kg and attach empty cylinder. Open valve and wait until the flow stops.
The little reverse...
Do you mind giving me a little run down on how you went about it. Did you use power to hold them open?
Hi Guys, Im looking to get the injectors cleaned but i've been told that this particular style of side inlet injectors can't be serviced. Has anyone had them cleaned professionally? Im not prepared...