I am currently waiting the get my Ignitor II back from ProQuip as my TB42 died on the roadside 2 weeks ago, so I put in for a warranty claim on the unit as the autoelec tested and advised no signal....
Type: Posts; User: PureCaboose
I am currently waiting the get my Ignitor II back from ProQuip as my TB42 died on the roadside 2 weeks ago, so I put in for a warranty claim on the unit as the autoelec tested and advised no signal....
Mounting screws for the front grill to replace the cable ties.
New alternator, 100amp.
removed the front bar and remounted winch after servicing
now I need to fix the 32-year-old wiring that is...
Sounds like all the functions on the steering wheel have ceased to function. I would start looking at the connector for the wheel assembly
I had the happen on my GQ Auto, only had drive in 1-2 and R. Had the box rebuilt, when it was stripped down the rebuilder showed me the damage/wear to the clutch plates. They were just worn out....
Going in for a blue slip on Monday, it's has been a long and shitty journey. Did the engine (finally) evacuating during the fires. It developed a severe pistol slap on cylinder 1, along with the low...
My wife does calanders most years to raise funds for our charity, she gets them printed as Vista Print.
Cheers
Greg
That is nice, I am in the middle of fitting Kut Snake flares and need to sort out some mud flaps....
What do the chains connect to on the vehicle end?
So I have done some research, and there are many human medicine equivalents (human medicine is not my area)
3M makes Coban, some Euro version etc and I found TGA approval for a compression...
I have boxes and boxes of this in all different sizes and colours. Common names ad Vet Wrap and Co-adhesive
I even some some with glitter on them (which the clients hate as it gets all through the...
Stupid auto correct, and I can't edit the subject....
Does anyone know the size/thread for the bung that does in the coolant gallery behind the exhaust toward the rear of the engine?
I just filled up my coolant only to have it piss out the side of...
I just did this, in the end I removed the head to replace the shit gasket that the rebuilder used. According to the manual, you can remove the timing chain cover without removing the head. It says to...
Wooo Hoooo.
I took out the rubber engine mounts, and the bolts fit back in. Thanks for the suggestion mudnut. It worked a treat.
Now to work out where everything else goes...
Thanks for the suggestions, I left the transmission in and unbolted and removed the engine. I removed the bolts while the transmission was hanging down on the jack. In my defence, it was eight weeks...
So I am reassembling the engine gearbox in the vehicle and I can't get the top two bolts back in as they hit the firewall before they are in enough to slide in. Is there a trick besides taking the...
I love your work, I am so limited in what I can do in my workshop at the moment due to all the joeys in care...can't even finish putting the engine back together.
Great to see someone repairing...
Photos of my shed, as it stands today...
The slab, waiting for the boards to come off tomorrow morning
81019
and the shed
81020
It's been a but hectic, but the engine is out and the long block has been pretty much stripped of all needed parts. All I need now is time to put it back together again.
In the mean time, around...
and so it starts, bonnet off
80696
also took off the roof rack, tent and awning, front bar, winch and cradle, headlights and the plastics bits off the front and drained the radiator fluid (I...
OK, so here I go.
I have a 1989 GQ Wagon TB42S AUTO. What I wanted was a TD42, manual, shorty but the Mrs picked her new truck first and ended purchasing a Triton as it is nicer, less rough and...
Ok, so the Mazda is back so the engine swap (and other works) is about to start.
I will start a new thread on my work/progress in case I do something this has not been done before (unlikely), but...
I am stumped at the moment. My TCU has no power to the red (with grey band) power that comes into pin 28.
I know this because I just installed a Wholesale Automatic lock up converter kit and when...
Done, kept forgetting to get this done. Better late than never I hope..
Does anyone want the middle seats (folds in 2 sections) and the rear folding seat from my GQ Patrol Wagon?
I have removed them to make my rescue/transport vehicle for wildlife and desperately need...
That's great. I rigged up something similar for mine (with the rooftop tent) from the old gear I had from the kayaks.....then I realised that I can't fit the patrol in the garage with the tent...