Search:

You wicked beast - you are tempting me I reckon! The flares look great. My concern is mostly the cracking of the paint when you bend the guard - how did that work out for you? The other thing is my...

Sorry to hear Chris, huge weekend and build up no doubt with big expectations. Anyway, another step closer.

Bloody hell, thats a bullet dodged.

Looking good Chris. I have been working REALLY hard on your new wiring loom as well!!!

Hey as an option, maybe too late, Enzed do sell a light blue hose with barb fittings that dont need any crimping or clamps. You cut the hose and push then fitting into the hose. They have to be cut...

I have dealt with these guys a bit and they will slam one in an express bag for you, no problems, just takes a call if you are in doubt with the other one.
...

Do you have the room to do it it in a couple of steps, instead of a straight M10 to AN4 config?
Did ou try autobarn or super cheap by any chance?

Winnie, maybe a typo but M10 x 1.5P is a standard metric coarse thread pitch, about as rare as politicians lies! M12 x 1.5 is equally as common as a metric fine pitch, so no idea why they told you...

OK< I know standard pitch is 12 x 1.75, then fine pitches at 1.5 and 1.25, kind of look a bit like UNF.

I will have a look in my bolt rack as well and bring down a couple on Saturday, just in case.

I would be surprised if its not metric. A fine pitch form at a guess. What approx. size is it? From there head down to the 'bolt guy' and pick up a couple of samples to try. Why do you think It is...

Are there any firm conclusions on the failure cause Chris?

Thanks, I do a great job.

Happy to help advising on cable runs!!!!!

I worked with a Scottish guy many years ago and he told me the story of how he discovered his old morris had dropped the oil ring out of one of the pot and was belching oil smoke. He was getting...

Would you feel any vibration from a bent rod - assuming it can still cycle about the rotation? If its bent its going to sit in a different part of the cylinder as well I guess. I don't know much...

Matt, how much water would you need at say 2000rpm to give a hydraulic lock up? This would be more than a weeping leak wouldn't it?

Chris, feeling sick for you at the moment. Really shitty hand you got served mate.

I had my SS snorkel done in Shepp and it cost $50. Bullbars were $150, reckon its probably a lot quicker than a bullbar, maybe the $100-125 at a guess. That included the light grit blast as well.