OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

Search:

Type: Posts; User: Dagwill

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Replies
    13
    Views
    773

    Removed complete EGR system, fitted blanks where...

    Removed complete EGR system, fitted blanks where I removed it. Just taken for a drive and no eng. warning light, computer seems fine with it.
  2. Hi,, small correction, what I remembered as...

    Hi,, small correction, what I remembered as "small spirally gear" is in fact straight cut shaft about 20mm diameter. [ the gear that goes into the vac. pump ]
  3. does the auto trans really need its own cooler, plus the radiator ?

    I was thinking of replacing the radiator. Bit more thinking,,,,, Hm might add separate cooler for the A/T rather than loading up the radiator with extra heat.
    Then while looking at the existing...
  4. Replies
    6
    Views
    304

    I had to remove that bracket before i removed the...

    I had to remove that bracket before i removed the timing gear cover
    Theres 2 or 3 bolts that are very hard to get to . One that took me 1/2 hr to get out and skun knuckles and 1/2 hr to get back in....
  5. depends which gear has stripped also. weather...

    depends which gear has stripped also.
    weather timing gears have stripped ,, or weather its the spirally gear on the end of the balance shaft.
    easy enough to remove vacuum pump and inspect [imagine...
  6. Replies
    13
    Views
    773

    Hi I have just removed my entire EGR system....

    Hi I have just removed my entire EGR system.
    Made up two 4mm thick blanking plates, One fits near the turbo on the exhaust. The other on the inlet manifold.
    Those holes blocked I was able to get...
  7. I understand the "head scratch" ,,, car owes me...

    I understand the "head scratch" ,,, car owes me nothing, i can spend a bit. 2001 is it worth putting 3.5K parts in that will add no value ? Its in really good nick, dont want to scrap it....
  8. Thread: ZD30 Issue

    by Dagwill
    Replies
    7
    Views
    362

    Hi Beesee , frustrating, I know only too well...

    Hi Beesee , frustrating, I know only too well
    Diagnostics,,,,not sure so be carefull,, someone here correct me if im wrong
    With ign. turned on find diag. plug. Using a thin wire short out the to...
  9. ZD30 Replace IP, Things to remember, How to.

    Just replaced VP44 in my 2004 GU , which turned into a nightmare. Could have been very simple, if I had known this.
    Got all the extras off, timing cover off, etc, nearly time to remove IP
    The IP...
  10. Replies
    2
    Views
    185

    Not sure but when talking to supplier I got the...

    Not sure but when talking to supplier I got the drift numbers could be a little different, but then you need to reprogram the computer?
  11. Decided the only thing to do was remove gear...

    Decided the only thing to do was remove gear cover and start from scratch.
    Thanks fireblade for first diag.
    V BIG job and tricky, to remove gear cover it was neccessary to remove Wpump studs and...
  12. Replies
    2
    Views
    185

    Hi , I just replaced IP. The same numbers you...

    Hi , I just replaced IP. The same numbers you quoted. When I got home with shiny new pump in sealed bag, I opened the bag and by chance checked numbers. The tag on the bag finnished -4025 same as...
  13. Thanks fireblade, I will keep you informed

    Thanks fireblade, I will keep you informed
  14. 2004 ZD30 direct inj.

    2004 ZD30 direct inj.
  15. ZD30 Replaced IP , Pistons hitting valves ?

    Help please, I am now raising my voice to my wife,,,, and she doesnt deserve that.
    Removed IP
    Didnt mark anything.
    Forgot to lock scissor gear, but got it reset and the 6mm bolt in and firm.
    OK...
  16. Replies
    3
    Views
    155

    Hello everyone from Dagwill

    Hi from David Allan Graham Williams, 64yrs old I live at Lyndoch Australia
    2006 GU patrol and sons 1996 Terrano
    Grew up without a father and at 16 decided to put a new set of rings in the Morris I...
  17. Thanks for response. Its a DI 2006 ZD30 Im in...

    Thanks for response.
    Its a DI 2006 ZD30
    Im in the proccess of replacing the IP at the moment, its one of those jobs I was going to get around to [blanking EGR ] but as i have so much stuff removed...
  18. ZD30 can i remove entire EGR system. Or will computer have a fit???

    While doing some other work and cursing at how cluttered things are, I looked at all the EGR plumbing and thought rather than inserting a blanking plate I wonder if I could remove the whole system. ...
  19. Just disconnected the fuel return line from IP. ...

    Just disconnected the fuel return line from IP. Ign. key OFF and hand pumped primer , I get a dribble of about 3 drops per second. Ign key ON still get a dribble about 3 drops per second.
    Any...
  20. Thanks mudski for your reply. I will take onboard...

    Thanks mudski for your reply. I will take onboard future posting habbits as you advised.
    Maybe i just have to face the bitter facts and pull the IP. My reluctance was mainly due to false hope,...
  21. Hot wire IP , so im sure if its IP or electrics ??

    Hi, Zd30 Di [2006]
    Died while driving, wont start.
    Noticed when i turn on the key there is a ticking/buzzing noise coming from IP area, lasts for bit less than a second, then stops. I believe it...
  22. Yes bought a scan tool when i had a Terrano,...

    Yes bought a scan tool when i had a Terrano, would not fit connection.? Ok so try it on the ZD30. fits the connection ok but cannot make contact with computer.?????
  23. Died while driving,wont restart, think its the IP, Help with codes please.

    Died under full load passing. Would not restart. Oops 96 3.0ltr Zd30 Direct inj. intercooler
    Oil and coolant fine. Disconnected line just after fuel filter, hand pumped fuel into tin just fine....
  24. Some joy, apparently i didnt have the slide...

    Some joy, apparently i didnt have the slide release quite far enough out, once i got it the plug removed rearwards easily.
    Plug connfiguration was a little different to the one shown in the manual....
  25. How to ,remove electrical connector from IP

    Zd30 engine wont start
    Tried to remove connector from IP so i can test # 7 for voltage.
    How does this plug come off. I see a 20mm x 40mm grey plastic part that i can slide out towards me 20 or 30mm...
Results 1 to 25 of 43
Page 1 of 2 1 2