Hi yendor
thanks mate, they say they (the probe wire) is very sensitive & i have it running through firewall with a heap of factory wiring where the bonnet pull cable goes through
i think i will...
Type: Posts; User: WORTHOS6
Hi yendor
thanks mate, they say they (the probe wire) is very sensitive & i have it running through firewall with a heap of factory wiring where the bonnet pull cable goes through
i think i will...
shit mate uv lost me
hi beneboy nice rig mate
ran power from 12 volt in steering colum
grounded with the lights onto just inside rhs kick pannel
then went to a sheilded ground back to batt & still same same
it seems...
h iteam
just wondering if anybody runs these gauges
power hookup was fine until fitted probe now when i turn aircond on gauge goes crazy
any help would be appreciated
hi tem,
just finnaly installed pyro gauge
the only problem i have is that when i switch the aircon on the bloody gauge goes sick flickering
main aircond a little scrambled but when i go to the...
i just put the new one over the old but if you have a new pod you have to cut the pod base
i checked out both ways but over the old cover i think is a nicer fit
hey satyx
mate jus goin through his at the mo
from your pillar pod take the old pillar cover off & next to the dash there is a small gap between he dash & pillar, runs your wires & boost line...
hi guys
stretched the dawes valve spring whoa what i difference
got a quick 18 psi settles to 16 quickly
the needle valve is doing something because the actuator did not drop back when i stopped...
hi chaz,
had a slight leak at the t comming off the boost line all redone
checked the neddle valve all good
started the car with the lines off & great vacuum from outlet of valve
i got the gauge...
good idea buddy i will do tomorrow & let you know how i go
thanks again
thanks Chaz
mate when i start the car & watch for the fall of the actuator arm on the turbo, the needle valve open or closed makes no diff the armjust goes up & thats it until i turn the car off...
no mate havnt touched it
yes mate
i re adjusted dawes & still only max spike 15 is just about closed now
i can find out & adjust the vnt screw but the worry is the needle valve
could i have plumbed it backwards??
i...
hi patch
from the return boost line after intercooler
no mate i dont know how
just adjusted the dawes nearly completley closed now & can get a 15 psi spike and only still around 12 max no adjustment left
yes mate boost but not egt as yet as heat sheild got acouple of stripped bolts still working on that one
hi trollers, i have fitten finally my dawes & needle valve but max is 12 psi & i have no idea if it is spooling correctly
the needle valve seems to have no affect at all.
i was wondering if they...
cheers boots
hi guys
can i ask if someone can post a pic up of whre the hell the vacuum pump is on the zd30
hi trollers how are we
just checking a couple of things in regards to egr block
the boost seems to be all over the place the only constant i get is around the 60kph range.
i can be cruzing and...
sorry i read the post this time
got it
thanks again guys is this on the outlet side of the intercooler
your a legend mate
thanks heaps
thanks again guys
i see on chaz/s web site tha he tapped into the boost line going into intercooler
is this how you did it big flech
some pics would be great guys
again thanks for ther feed...