Panhard rod fell off, replaced with road safe Heavy duty. steerings still shonky??
gday boys. so my panhard rod fell off at the diff end ( passenger side front bush was left on the stud and the panhard rod fell out of the bushing due to the previous installer not putting the washer on it and it knocked out on a washout )
ive replaced it with a heavy duty panhard from road safe - I got really bad death wabbles just after I washed the car, pulled up at the lights and went to turn - felt the play in my steering wheel and heard a small thud - was the rod coming off - drove maybe 5 meters upto 15ks and front started jumping all over the place, left to right out of my control. so my question is, what else needs to be looked at in this instance? my steering is very light and unresponsive still and doesn't feel right, I've got a little bit of free play on the same in my wheel when I lay under the car and kick it from the top the wheel physically moves so im thinking maybe bearings are f##ked too??? which would f##king suck considering I got them repacked last week on my major service.. f$#kin cu$#!!! :(
EDIT: add abit more info about the car. its a GU series 3, 4inch lift 35inch tyres, just had a major service done done about a week ago - so the place that done it is willing to go over everything again for me without labour charge because they missed that my panhard bush was flogged out at the major service and I had to get it fixed, and I hope I wont be paying for labour this time around when I take it back.
