Printable View
Cheers Again Philstar, Do Really Appreciate Educational Chats Brother [emoji145] OFF[emoji106][emoji106]
The old now scrub truck (without tray) is way too light these days, more than happy to load up its arse end for added traction and lighter again add 6x Expedition Boxes MAX to come full of good needed bits & bobs :-) [emoji123][emoji106][emoji106]
Sent from my iPhone using Tapatalk
The never ending rear winch installation has taken another turn now.
Looking to install it on the GQ ute build hopefully throughout February 2021 [emoji1696][emoji12]
Was hoping here for some final electrical advice please gentlemen so I can purchase some wire for this design below if you think this could work best hopefully too?
http://www.nissanpatrol.com.au/forum...021/01/181.jpg
Trying to isolate the 170amp deep cycle away from from winch loading and to keep the 12v Optima’s parallel connected for greater oomph winching front or back.
Any design flaws or better suggestions would be greatly appreciated and I do also please need expert wire size choice for the long distance back to the twin motor Mule power hog [emoji120][emoji106]
Cheers Mark
Sent from my iPhone using Tapatalk
Got ya covered bro [emoji4]
Will post up some info as we install it for others and see how she performs
Sent from my BV9800Pro using Tapatalk
He’s Alive [emoji23]
You’re a Legend thanks heaps always Matfew Mate [emoji120][emoji106]
Sent from my iPhone using Tapatalk
I found your winch today. i have sent it to you via Motorcycle Courier! They promised Next Day Delivery!!Quote:
Originally Posted by MB
Attachment 82904
GOLD.....Love IT [emoji23][emoji106][emoji106]
Sent from my iPhone using Tapatalk
Rear winch cradle got its final pressure pack paint this morning and final mounting to the GQ ute:
http://www.nissanpatrol.com.au/forum...2021/03/48.jpg
Matfew & Rossco kindly spent a big afternoon/evening assisting with wiring/lifting & heaps of other Super Appreciative Build Help LEGENDS [emoji106][emoji106]
http://www.nissanpatrol.com.au/forum...2021/03/49.jpg
Unfortunately the twin motor beast is running backwards for some reason and won’t rotate the opposite way either.
Posting this old schematic with notes below from my aged purchased although they were acronym line followed exactly with some contradictions found on the 1,2,3,4 locations of coloured lines out of the control box.
http://www.nissanpatrol.com.au/forum...2021/03/50.jpg
Contacting Sherpa in the morning QLD time for technical assistance as they were fantastic throughout the original purchase some years ago now [emoji106][emoji106]
Sent from my iPhone using Tapatalk
Get on the Beers Bloke!!! Looking grand
Officially, if @matfew can't figure it out then you are Farked Fella!
Is this of any help brother
http://www.nissanpatrol.com.au/forum...2021/03/54.jpg
Sent from my SM-G977B using Tapatalk