Parts arrived today:
Attachment 77618
Attachment 77619
Printable View
Parts arrived today:
Attachment 77618
Attachment 77619
Super quick delivery!
Thanks guys, in theory as NNB says and i thought the lift pump should purge the air out, but if it dies, you can still use the hand pump. Now Poindexter you have the super sexy air removal pump, you should be pushing the air out and back to tank with ease? The second question then remains, when I install the new turbo spec injectors, I believe I still have to crack each injector, or will the return rail take care of that also with the lift pump?
Yes but either way you will need some port of escape for the air either being a disconnected hose/line or an air bleed nipple. You can generally get away without disconnecting anything with an electric lift pump and just allow it to pump for a bit before startup.
Or a fancy unit that dors it by itself.
Bits are arriving still. AEM Water Injection system plus some shots of the other parts, CAT, lift pumpAttachment 77667Attachment 77668s, filters
OK, the custom convertor has arrived.
Attachment 77822
Will see how it performs.
Luca from Roadblaster did the modes, and put an 18 blade turbine inside (std is 12 blade) to see how the stall goes.