GME Programming Lead Diagram

Printable View

22nd December 2010, 08:53 PM
sarge1950au

1 Attachment(s)

GME Programming Lead Diagram

This is to suit the following models.....

TX3200
TX3220
TX3400
TX3420
TX3600
TX3620
TX3800
TX3820
TX4400
TX4600
TX4800

Have a heap of GME programming software, just ask, and if I have what you need, it's yours.
22nd December 2010, 09:05 PM
NissanGQ4.2

Top stuff, did you use 2 be a dealer? thought the software was hard to get
22nd December 2010, 10:53 PM
sarge1950au

Mate, I had a business designing electronic radio controlled target systems for Police and Security firearms training, and had mates in the radio game who gave me software for most of the GME's on the market!! I used to do lots of programming for people on a radio techies forum.....
22nd December 2010, 11:57 PM
patch697

Thats just great Sarge, what an asset to the forum this will be.

Thank you very much indeed.

Feel free to throw up a post in our vendors section for your business if you like to mate.

http://www.nissanpatrol.com.au/forum...-Vendor-Thread

Cheers
Paul
26th January 2011, 03:55 PM
gbatt64

Hi Sarge , great to see that there is at least one more Radio Tech out there , been playing with radios & electronics for 34 years (opps showing my age)

Cheers Graeme
26th January 2011, 10:51 PM
Finly Owner

Quote:

Originally Posted by gbatt64

Hi Sarge , great to see that there is at least one more Radio Tech out there , been playing with radios & electronics for 34 years (opps showing my age)

Cheers Graeme

Graeme have you always been down south? never lived up this way?
10th February 2011, 07:10 PM
dronus

i bought the radioworks programming lead for the GME tx3820 and have a copy of the programming software but everytime i try to connect to it i get a message saying that it cannot connect to the radio, and i should check my com port and lead. I have tried it on winXP and win7, both using a USB-serial adapter and straight to a serial port.

I have it set to com 1 (which is correct), and default speed etc.

Funny thing is, it connects fine to a tx3800.. Any ideas or someone in adelaide who might like to have a look?
10th February 2011, 07:20 PM
Woof

Hey Dronus, it's always a good idea to post up an introduction before asking questions mate, just gets everyone on side immediately.
10th February 2011, 07:27 PM
NissanGQ4.2

Quote:

Originally Posted by dronus

i bought the radioworks programming lead for the GME tx3820 and have a copy of the programming software but everytime i try to connect to it i get a message saying that it cannot connect to the radio, and i should check my com port and lead. I have tried it on winXP and win7, both using a USB-serial adapter and straight to a serial port.

I have it set to com 1 (which is correct), and default speed etc.

Funny thing is, it connects fine to a tx3800.. Any ideas or someone in adelaide who might like to have a look?

Hi there, welcome 2 the forum mate, my suggestions is to 1st.....post up an intro as more members will respond if you have done an intro. 2nd start a new thread with your question, as u might get more of a response. I have a TX3400 and have no drama's connecting, don't think i have tried it in win7 but can't see it been a problem if i ran it in XP mode. Will run it on the weekend 2 see if it connects on win7 without XP mode.

Cheers

Todd
29th March 2011, 03:15 PM
andistahl

mate,
may I ask you for the software for the TX3220 ?
I searched high and low and just cant find anything on the net.
And if you dont mind, a higher detailed diagram which allows to read the details of the components would be great as well :-)
Thanks heaps in advance
andistahl
29th March 2011, 07:16 PM
NissanGQ4.2

Quote:

Originally Posted by andistahl

mate,
may I ask you for the software for the TX3220 ?
I searched high and low and just cant find anything on the net.
And if you dont mind, a higher detailed diagram which allows to read the details of the components would be great as well :-)
Thanks heaps in advance
andistahl

I will have a look if i have it, Or if i can get my hands on it.

But you will need 25 posts before you can download it.

Don't forget 2 post up an intro about urself in the introduction thread when you get a chance.
29th March 2011, 10:18 PM
NissanGQ4.2

Quote:

Originally Posted by andistahl

mate,
may I ask you for the software for the TX3220 ?
I searched high and low and just cant find anything on the net.
And if you dont mind, a higher detailed diagram which allows to read the details of the components would be great as well :-)
Thanks heaps in advance
andistahl

You can download the TX3220 software from this thread

http://www.nissanpatrol.com.au/forum...9010#post59010

Sorry can't help with the diagram your after

Cheers

Todd
21st September 2011, 09:58 PM
maccamenzies

Hi all.Just bought a TX3440 and hoping to build the usb cable. Regrettably i cant view the diagram yet as having just joined. Its great to see a forum with good info.Keep up the good work.
22nd September 2011, 05:26 PM
NissanGQ4.2

Quote:

Originally Posted by maccamenzies

Hi all.Just bought a TX3440 and hoping to build the usb cable. Regrettably i cant view the diagram yet as having just joined. Its great to see a forum with good info.Keep up the good work.

Post up an intro mate, and welcome some new members and you will have your posts up in no time :)
2nd October 2011, 08:19 PM
benkee

Help

Quote:

Originally Posted by sarge1950au

This is to suit the following models.....

TX3200
TX3220
TX3400
TX3420
TX3600
TX3620
TX3800
TX3820
TX4400
TX4600
TX4800

Have a heap of GME programming software, just ask, and if I have what you need, it's yours.

I need it all i got radios that need programing straight away 4 camping trip and 4x4 an motor cross pls help benkeegan@tpg.com.au iám a new member so i cant use link yet my 5 post thanks mate
2nd October 2011, 08:25 PM
NissanGQ4.2

Quote:

Originally Posted by benkee

I need it all i got radios that need programing straight away 4 camping trip and 4x4 an motor cross pls help benkeegan@tpg.com.au iám a new member so i cant use link yet my 5 post thanks mate

Post up an intro Ben, welcome some new members and you will have your posts up in no time.
3rd October 2011, 05:36 PM
benkee

Quote:

Originally Posted by toddrhind

Post up an intro Ben, welcome some new members and you will have your posts up in no time.

Is there a intro page i cant find it yet but will keep looking and Thank you for the quick replay ...Cherrs
22nd January 2013, 12:09 PM
Lowedoggy18

im also chasing the software for the tx3220, i have tx3800 software and tx3500 software so if anybodys willling to trade.also isnt it easier just to buy the lead off ebay ??
17th June 2013, 02:17 PM
rockshow

hi sarge my name is tony ,I used to be a 4x4 traveller still am slowed up a bit due to age,i was looking for the programming software for the gme tx 3800 uhf do you have this software or a link please great site guys learning lots cheers ears
17th June 2013, 02:18 PM
rockshow

yes atleast youll know it works
2nd September 2016, 12:30 AM
mjr350

I know this is an old thread but what's the chances someone has the software for the newish tx3500s? Would the earlier tx3500 software work?
I'm picking one up tomorrow as my old uniden packed it in and i had a few local rx only channels that I would like to keep.

Sent from my SM-G930F using Tapatalk
2nd September 2016, 06:31 AM
NissanGQ4.2

Quote:

Originally Posted by mjr350

I know this is an old thread but what's the chances someone has the software for the newish tx3500s? Would the earlier tx3500 software work?
I'm picking one up tomorrow as my old uniden packed it in and i had a few local rx only channels that I would like to keep.

Sent from my SM-G930F using Tapatalk

Not sure if the old software would work on the newer models, just try it and if it doesn't send me a PM and I'll see what I can do
2nd September 2016, 11:31 AM
mjr350

Sorry. Should have mentioned that I don't have any software yet

Sent from my SM-G930F using Tapatalk
25th January 2018, 12:19 AM
skotyp

hi, im scott, i know this is an old thread. but did anyone get a copy of the software? im trying to hunt it down.
25th January 2018, 05:41 PM
NissanGQ4.2

Quote:

Originally Posted by skotyp

hi, im scott, i know this is an old thread. but did anyone get a copy of the software? im trying to hunt it down.

@skotyp

Scott what software are you after?

The GME TX3200, TX3220, TX3400 & TX4400 software can be downloaded from this thread: http://www.nissanpatrol.com.au/forum...9010#post59010
30th September 2018, 09:33 PM
cbuser

Hi serge!
can you please send me software for my GME GME TX3220 radio to my e-mail: victorzum@yandex.com , thank you Victor
30th September 2018, 10:23 PM
cbuser

Hi ! good stuff! I hope it can help! Thanks!
1st October 2018, 09:04 AM
NissanGQ4.2

Quote:

Originally Posted by cbuser

Hi serge!
can you please send me software for my GME GME TX3220 radio to my e-mail: victorzum@yandex.com , thank you Victor

Hi Victor, it can be downloaded from this thread: http://www.nissanpatrol.com.au/forum...400-amp-TX4400

Regards,

Todd
21st January 2019, 06:03 PM
Trolpatrol

Hi guys. Can I please have a link or can some one please email me the program for TX3820 ... would really be appreciated
21st January 2019, 08:16 PM
NissanGQ4.2

Quote:

Originally Posted by Trolpatrol

Hi guys. Can I please have a link or can some one please email me the program for TX3820 ... would really be appreciated

I'm lead to believe the TX3600/TX3800/TX3820 Software is the same package, so just download the TX3600 from the below link.

Cheers, Todd

http://www.scaits.com.au/downloads/GME/
12th April 2021, 08:57 PM
hotzy19

Hi Sarge, I was going to build this programming circuit. I have a usb to rs232 adapter, Can i connect it to this and program the radio? just wanted to check before ordering the parts. Cheer John
3rd May 2022, 11:50 AM
minute

Hi Guys. Signed up so I can build myself a GME programming lead. I have loads of software already is anyone needs some hit me up. This forum also might be very useful to me as alot of my friends have Patrols though I am a Toyota Man myself :D
Cheers
7th December 2022, 10:07 AM
Trung

Thanks mate

All times are GMT +10.5. The time now is 08:29 PM.