Printable View
Hi guys
Sorry if this is a stupid question but I’m new to the world of CB radios. My son installed my icom radio finally and she works just fine.
I’m just wondering what to do when I’m just driving around and not in a group or convoy etc. do I leave the radio in open scan mode and listen out for what other conversations are going on in my vicinity? Just wondering what other folks do. And if you guys have any tips for a newbie I’d be grateful to receive them.
Cheers
Paul
Hi Mate,
I leave my CB off except when travelling.
If travelling with a group we pick a channel and all stay on it to chat.
When travelling on my own I will put it on 40 to listen and chat to the truckies and call them when overtaking, will also switch it to channels shown on back of caravans to call them when overtaking.
On some tracks they ask you to stay on a specified channel so you can hear and talk to others on the same track.
Usually have mine on scan most of the time. There are a few narrow bridges in my area & truckies call when they are approaching them on channel 40 & I have that set as the priority channel.
Some of the State Forests that are regularly logged will have a designated channel to monitor for logging trucks & some roads have signs every 5 kms along them. Good practice on these roads to send a call on the designated channel - "South on Bobs Rd at the 24 km marker" for example to give other drivers a bit of warning.
List of Channel Allocations - http://www.uhfcb.com.au/80-Channel-UHF-Information.php
Thanks guys
Very good advice. I’m beginning to wonder about the merits of leaving the radio switched off or not scanning all channels. Some of the carry on on a couple of them is colourful to say the least. Certainly wouldn’t want any of the family listening to that! I sure one of the repeater channels in my area is run out of a house of ill repute!
Good idea to call out position on the logging roads too. I think I will leave my priority channel ad 40. Thank very much for the link VK.
Cheers
Paul