Printable View
Hi all , noticed after my motor was repaired that my CC doesnt work anymore.
Light goes on but it wont set any speed. .
If someone could tell me where the Autron cruise control is I might be able to retrace it.
As far as I know the engine remained in the Patrol to do the head work.
TIA TD
Bumped................
Got no idea John, being an aftermarket thing I would guess up under the dash somewhere. You'd have to find it and trace the power wire to it and see if its fused and if so, is it blown. First thing I'd check for.
I had a similar problem with mine, turned out to be the battery in the controller on the steering wheel. it takes a button type battery
It will be wired into your brake lights - probably not far from the brake light switch. Should be able to identify that and trace the wiring back to the unit.
If it picks up the vehicle speed via an inductive sensor and magnet on a shaft somewhere then that is a likely culprit as it might have been interfered with during engine works.
AH that might be right as recently I changed the brake light switch.Quote:
Originally Posted by Brissieboy
Will check it out very soon Thanks