Nah mate no $$$ plus not going anywhere until I can stand for at least 5 minutes, just too painfull
Printable View
received my supapeg custom awning today, got a 5% discount plus an led stip and sand peg kit free by mentioning the facebook special so i was happy with that, now to fit it up over the weekend.
@ Stropp as per pic my LED strip light worked a treat ,that was the only time Ive used it tried it again last weekend and only 1/3rd worked .
So I ripped them off and threw them in the bin, Im now going to use 200mm cob strips that some use as DRL will only need two they are very bright.
http://www.ebay.com.au/itm/161275684...84.m1423.l2649 They are very bright
Saw it leave on the flat bed off to its final resting place :(
:(:(:(:(:(
Installed new coil packers 15mm to replace the rubber insulators that are stuffed. Backs done and front tomorrow
You should have done it when you did the springs...:D
Finally fitted my rated recovery points to the front, passenger side was a bit of a pain, but glad it's done now also wired in my connectors for my UHF antenna lead so I can disconnect the bar from the front without having to cut the wire at the time.
Worth mentioning is my recent arrival and fitment of my roof bars, got them from ebay for $189.00 for three bars, fitted them up, and no wind noise, work really well. So much cheaper than the local stores!
If anyone wants the link just let me know, and I'll post it, only thing worth mentioning is they do have locks, but it reckon I could unbolt them even with the locks. Still, I am otherwise very happy with them, and soooo much cheaper