sorry I cant get to post a picture its the plug on the Aux tank pump control in the dash just above the heater controls .
I can touch it but cant get it to come appart
Printable View
sorry I cant get to post a picture its the plug on the Aux tank pump control in the dash just above the heater controls .
I can touch it but cant get it to come appart
In the GUIV it pulls out from the back of the dash then unplugs
I think the OP means which bit of the plug do you squeeze to get it to disengage from the socket... been so long now since I've done one that I forget and windows 10 makes looking it up in the manual a PIAQuote:
Originally Posted by MudRunnerTD
yes I cant get it to come apart !!
I don't want to break it .
Yes I found the manual not much good on windows 10 !! glad someone else is having a problem .
I thought I was doing something wrong . I wanted to download it and take it to Office works and have it Bound ( on a usb stick )
Damn it. I had mine in my hand last night and could have taken a better look for you. I didnt unplug it though i just had to take it out of its socket. I have relocated mine to the gear stick surround so i can see it rather than the stupid spot they put it in the GUIV.
If you can upload a pic or download Tapatalk to your phone and upload from there we can try and figure it out.
Most socket sections will have a metal style cup to hold it fast he plug sections will either have a screw to pull it apart like the the red section will unscrew from the black body, please avoid this style very cheap and unreliable, but either a merit style [european] or maybe a 50 amp anderson style. bullet proof imo
^^^^
Jeez TD... my Babel Fish just had an anxiety attack !!!
Attachment 76090
here is the picture I think !
Good I can see it but how does it come appart
Squeeze that lug in the centre and wriggle (the plug that is)Quote:
Originally Posted by Tip12345
I will try that ! any idea what the control is attached to behind the dash ? I am trying to remove the heater ventilation control .
Without having a breakdown ..... what a bugger of a thing to get out ..
right o . pushed and did the wiggle thing ..But
Any ideas what I might put on it to help any sort of spray lube ? its dam tight !! I don't want to break it .
The heater control unit has two cables running to either side of the heater box. Plus and electrical cable plugged into it.Quote:
Originally Posted by Tip12345
Yeah mine came apart real easy. spray some crc or similar on it. It will come apart. Tis all fresh in my mind as I recently did the heater core r & r, full dash out job...Quote:
Originally Posted by Tip12345
so did you take the heater controls out ? Mine has a bent cable . I believe . you have to take the glove box out to remove the control through the glove box hole ! I hat the dash thing .....