My Camper Trailer Build Thread
One thing, I probably will end up reinforcing the side walls if they look lacking, you are right TD the sides are angle but it's very thick folded steel, would 2.6mm thick sound right?
Tappin
1 Attachment(s)
My Camper Trailer Build Thread
Added Te first second and third panel today. Forgot to take a pic after the first one went on tho:Attachment 27030
Tappin
My Camper Trailer Build Thread
Quote:
Originally Posted by
threedogs
Looking good buddy need an overhead compartment for radio etc.
I covered mine in colour bond sheet then trimmed it
with 25mm x 25mm Aluminium angle, Smeared a touch of silicon on before
riveting on.
Didnt need to line roof as solar panel covered most of roof
but sides I use 20mm polystyrene sheet
Hey mate, thanks for the feedback. Yeah so you may just be able to see the shape of a shelf on the left of the pic. I haven't decided whether to enclose the shelf or make it open, probably better for making stuff not fall down.
I'm using the same stuff, colourbond sheet, with blind rivets every 100mm. And ally 25x25 angle with a nice bead of silicone.
I plan on insulating the walls, I was thinking with polystyrene or something like that, any ideas on something better?
Tappin
2 Attachment(s)
My Camper Trailer Build Thread
So it's progressed more out about 7 hours in tonight it's looking better and better:
Attachment 27261
Attachment 27262
Tappin
3 Attachment(s)
My Camper Trailer Build Thread
Nother 7 hours and this is what I've accomplished =)
Attachment 27284
Attachment 27285
Attachment 27286
Tappin