1 Attachment(s)
Mudski's High Warn High Mount Rebuild into an ARB GU Bar
Go the front plate cut and spot welded in. Not sure if I weld the plate the heat is going to damage the bumper though.
I got a contact at ARB head office chasing new rubbers for me but they are not sure if they are available. As I will have to cut these off. I’ll just wait and see next week before I decided on a plan.
Hopefully I can as I want to get the bar sandblasted and powdercoated too when it’s done.
Attachment 81125
Sent from my iPhone using Tapatalk
1 Attachment(s)
Mudski's High Warn High Mount Rebuild into an ARB GU Bar
The final fit up of the winch I had to cut more out.
Attachment 81128
I was hoping to get the bit out in the bottom left of the pic with adjusts the depth of the bar when mounted up. But it seems it’s seized/ rusted in and I’m worried I’ll snap the thread off. It’s been soaked it everything, hit with heat, frozen and it’s got to a point it won’t go any further without breaking. This is all that’s holding me up now. So close...
Sent from my iPhone using Tapatalk
5 Attachment(s)
Mudski's High Warn High Mount Rebuild into an ARB GU Bar
Well ARB are firing up the old plant and will be making two new bumpers for me. I should have them in a week or two.
Attachment 81136
Going to weld on two extra aerial tags too.
I have done a test fit of the high mount bolted in. Fitted up good.
Attachment 81133
Attachment 81134
Attachment 81135
Sent from my iPhone using Tapatalk