DIY -Ryco A360 flat panel airbox with 4" in/out

Quote:

---

Originally Posted by jff45

I wouldn't bother, I'm enjoying my retirement doing stuff for myself..

---

Heya bloke! If you still have the pattern and I can induce you to build another I'd be happy to part with the necessary.

Perhaps just pay you for a copy of the pattern? :smiley_thumbs_up:

Quote:

---

Originally Posted by Touses

Heya bloke! If you still have the pattern and I can induce you to build another I'd be happy to part with the necessary.

Perhaps just pay you for a copy of the pattern? :smiley_thumbs_up:

---

Johns certainly done such a professional job on the air box hey? I'm still gobsmacked with his work.

Cheers Mark, I'm still not interested in making one for someone else :)

You'd be surprised how simple it is if you buy a filter, grab some cardboard and ducting tape and get to work with the scissors.
This thread was meant to provide inspiration so get inspired and get stuck into it :)

I should add, it seems to be working really well with the Mamba (TD05H copy) 16G/6cm I've just fitted.
Hitting 22 psi easily with not too much induction noise

Quote:

---

Originally Posted by jff45

Cheers Mark, I'm still not interested in making one for someone else :)

You'd be surprised how simple it is if you buy a filter, grab some cardboard and ducting tape and get to work with the scissors.
This thread was meant to provide inspiration so get inspired and get stuck into it :)

---

Ok so I can't buy my way out of this one. In that case I shall become inspired and have a crack!
Bandages, check. Eye wash, check. Ambulance on speed dial, check. All set! :smile:

Very nice work buddy! Very impressed espicially with limited tools...
Just wondering if u have tested how well it seals???

As if the DIY air box wasn't enough inspiration to build, you go and throw in the DIY panbrake too! Thanks for the efforts of the writeup! You inspired me.