Mines very water friendly. It never sees it. Apart from rain water. Lol.
Mine is an old TJM Ox.
Sent from my GT-N7105T using Tapatalk
Printable View
Ok.
Looks like my hand held was the problem all along.
Now that I now that my controller is no good and don't like the chances of finding one I need to run a in cab switch. I also want to have a push button near the winch on the bullbar to spool in/out while not in the car. If i'm going to do this, it might as well be pobably. Will move the solenoid to the engine bay.
I think I have gotten my head around Bens pic, That said I still have a few questions.
This the switch I'm going to use inside
http://www.ebay.com.au/itm/231996221...%3AMEBIDX%3AIT
This one on the bar
http://www.ebay.com.au/itm/132005868...%3AMEBIDX%3AIT
I've done a litte drawing of how i think it all goes, just not sure on 8 & 7.
http://www.nissanpatrol.com.au/forum...2016/12/90.jpg
You'll get a hand controller cheap on eBay if you want
Sent from my E6653 using Tapatalk
Jay see think of it this way the switch you want to put in the cab is the same switch on the controller
Winch switch is worked out. Helps when you have a switch that works.:smiley_thumbs_up:
Now for another question. I going to run an isolator switch as well do I need to run either one through a relay?
its nice to see that color blue! if got the same but its a 98.. dont see to many of them anymore